User Manual

95-7883HG
2
Dash Disassembly
1. Remove(1)Phillipsscrewfromthe
trimpanelbelowthea/ccontrol
thathousestheaccessorysocket
andfactoryUSB’sthenunclipand
removethepanel.(FigureA)
2. Remove(1)8mmboltfacingupin
cavitybehinda/ccontrol.
(FigureB)
3. Unclipandremovetheinstrument
clustertrimpanel.(FigureC)
4. Unclipandremovethea/cvent
trimpanelincludingthevents
abovethefactoryradio.(FigureD)
5. Remove(2)8mmboltssecuring
thefactoryradiothenunclipand
removetheradio.(FigureE)
6. Remove(2)screwssecuringthe
airbaglight.
7. Remove(2)screwssecuringthe
hazardswitch.
Continue to kit assembly
(Figure C)
(Figure D)
(Figure E)
(Figure A)
(Figure B)