User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 95-8214TB Double DIN Dash Kit for Toyota Tacoma 2005-2011 Vehicle (Black)

METRA. THE WORLD’S BEST KITS.™

APPLICATIONS

1-800-221-0932

metraonline.com

INSTALLATION INSTRUCTIONS FOR PART 95-8214

REV. 4/10/12

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness:

• 70-1761 - Non-amplified Toyota harness

• TYTO-01 - Amplified Toyota interface

Antenna Adapter:

• Not required

• Panel removal tool • Phillips screwdriver • Socket wrench

TOOLS REQUIRED

Toyota Tacoma 2005-2011

95-8214TB, 95-8214TG

• A) Radio housing trim panel • B) DDIN Radio housing • C) DDIN Radio housing brackets • D) (4) Panel clips

• E) (4) #6 x 3/8” Phillips truss-head screws • F) Clock/Hazard switch bracket

KIT FEATURES

KIT COMPONENTS

• Double DIN head unit provision

• Painted and textured to match factory dash

• Both kits are factory “golf ball” style textured

• Available in two colors:

95-8214TB = Black, 95-8214TG = Gray

CA B D

Summary of content (16 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-8214 APPLICATIONS Toyota Tacoma 2005-2011 95-8214TB, 95-8214TG KIT FEATURES • Double DIN head unit provision • Painted and textured to match factory dash • Both kits are factory “golf ball” style textured • Available in two colors: 95-8214TB = Black, 95-8214TG = Gray KIT COMPONENTS • A) Radio housing trim panel • B) DDIN Radio housing • C) DDIN Radio housing brackets • D) (4) Panel clips • E) (4) #6 x 3/8” Phillips truss-head screws • F) Clock/Hazard switch bracket
PAGE 2
95-8214 Table of Contents Dash Disassembly – Toyota Tacoma 2005-2011 .......................................................................................... 3-4 Kit Assembly – Kit preparation .................................................................................................................5 – Double DIN head unit provision ........................................................................................
PAGE 3
Dash Disassembly 95-8214 Toyota Tacoma 2005-2011 1. Unclip and remove A/C control panel. (Figura A) TEXT 2. Remove (4) 10 mm bolts securing radio. (Figura B) PWR VOL SCAN 3. Unclip and remove entire panel including hazard switch and clock.
PAGE 4
Dash Disassembly 95-8214 Toyota Tacoma 2005-2011 4. Remove the left and right radio brackets from the radio chassis. (Figura D) 5. Unclip and remove the clock/hazard switch assembly from the factory radio housing trim panel.
PAGE 5
Kit Assembly 95-8214 Kit Preparation 1. Attach the clock/hazard switch bracket to the radio housing using the (4) #6 x 3/8” Phillips pan head screws. (Figura A) WARNING: DO NOT OVERTIGHTEN SCREWS. 2. Clip the clock/hazard switch assembly into the 95-8214 radio housing trim panel. (Figura B) 3. Install the four included panel clips to the back of the Radio Housing Trim Panel (factory clips can also be used if desired).
PAGE 6
Kit Assembly 95-8214 Double DIN head unit provision 1. Attach the DDIN radio housing brackets to the DDIN radio housing. (Figura A) 2. Slide the aftermarket DDIN radio into the radio housing/bracket assembly and secure it with the screws supplied with the radio. (Figura B) 3. Secure the DDIN radio/housing assembly into the sub dash using the factory hardware. (Figura C) 4. Locate the factory wiring harness and antenna plug in the dash.
PAGE 7
Notas
PAGE 8
REV. 4/10/12 INSTALLATION INSTRUCTIONS FOR PART 95-8214 METRA. THE WORLD’S BEST KITS.™ metraonline.
PAGE 9
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8214 APLICACIONES Toyota Tacoma 2005-2011 95-8214TB, 95-8214TG CARACTERÍSTICAS DEL KIT • Provisión de unidad central doble DIN • Pintura/texturizado para igualar el tablero de fábrica • Los dos kits tienen textura tipo “pelota de golf” como la de fábrica • Disponible en dos colores: 95-8214TB = Negro, 95-8214TG = Gris COMPONENTES DEL KIT • A) Panel de moldura para carcasa de radio • B) Carcasa de radio DDIN • C) Soportes de carcasa de radio DDIN • D) (4) Ganc
PAGE 10
95-8214 Indice Desmontaje del tablero – Toyota Tacoma 2005-2011 ..........................................................................................3-4 Ensamble del kit – Preparación del kit ...........................................................................................................5 – Provisiones de unidad central doble DIN ..........................................................................
PAGE 11
Desmontaje del tablero 95-8214 Toyota Tacoma 2005-2011 1. Desenganche y quite el panel de control del aire acondicionado. (Figura A) TEXT 2. Quite los (4) pernos de 10 MM que sujetan el radio. (Figura B) PWR VOL SCAN 3. Desenganche y quite todo el panel, incluyendo el interruptor de las luces intermitentes y el reloj.
PAGE 12
Desmontaje del tablero 95-8214 Toyota Tacoma 2005-2011 4. Quite los soportes izquierdo y derecho del chasís del radio. (Figura D) 5. Desenganche y quite el ensamble del reloj/interruptor de las luces intermitentes del panel de la moldura de la carcasa del radio.
PAGE 13
Ensamble del kit 95-8214 Preparación del kit 1. Instale el soporte del reloj/interruptor de las luces intermitentes usando los (4) tornillos Phillips de cabeza troncocónica #6 x 3/8”. (Figura A) ADVERTENCIA: NO APRIETE DE MÁS LOS TORNILLOS. 2. Ponga el ensamble del reloj/interruptor de las luces intermitentes en el panel de la moldura de la carcasa del radio 99-8214. (Figura B) 3.
PAGE 14
Ensamble del kit 95-8214 Provisiones de unidad central doble DIN 1. Instale los soportes de la carcasa del radio DDIN en la carcasa del radio DDIN. (Figura A) 2. Deslice el radio DDIN de mercado secundario en el ensamble de la carcasa del radio/soporte y sujételo con los tornillos suministrados con el radio. (Figura B) 3. Sujete el ensamble de radio DDIN/ carcasa en el sub tablero usando la tornillería de fábrica. (Figura C) (Figura A) 4.
PAGE 15
Notas
PAGE 16
REV. 5/10/12 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8214 METRA. THE WORLD’S BEST KITS.™ metraonline.