User Manual

ManualsBrandsMetra ManualsAudio & Video AccessoriesMetra 95-8215S Double DIN Dash Kit for Select 2005-2010 Toyota Avalon Vehicles (Silver)

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 12/9/2014 INST95-8215S

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Installation instructions for part 95-8215S

• Double DIN radio provision

• Painted silver to match factory dash

• A) Radio trim panel • B) Brackets • C) (4) #8 x 3/8” Phillips screws • D) HVAC harness included (not shown)

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • HVAC harness included • TYTO-01 interface or 70-1761 harness

• ASWC-1 steering wheel control interface

Antenna Adapter: • Not required

• Panel removal tool • Phillips screwdriver

• Socket wrench

TOOLS REQUIRED

Toyota Avalon 2005-2010

95-8215S

A B C

Dash Disassembly

– Toyota Avalon 2005-2010 .................................... 2

Kit Assembly

– Double DIN radio provision ................................... 3

Table of Contents

Summary of content (8 pages)

PAGE 1
Installation instructions for part 95-8215S Table of Contents Toyota Avalon 2005-2010 95-8215S Dash Disassembly – Toyota Avalon 2005-2010 .................................... 2 Kit Assembly – Double DIN radio provision ................................... 3 KIT FEATURES • Double DIN radio provision • Painted silver to match factory dash KIT COMPONENTS • A) Radio trim panel • B) Brackets • C) (4) #8 x 3/8” Phillips screws • D) HVAC harness included (not shown) REV.
PAGE 2
95-8215S Dash Disassembly 1. Unclip and remove small trim piece from left side of panel above steering wheel. (Figure A) 3. Unclip and remove entire panel surrounding radio including A/C controls. (Figure C) 2. Unclip and remove panel above steering wheel. (Figure B) 4. Remove (4) 10 mm bolts securing radio.
PAGE 3
95-8215S Kit Assembly Kit Preparation ISO DDIN radio provision 1. Temporarily unclip and remove climate buttons from factory panel. 1. Secure the brackets to the radio using the screws supplied with the radio and mount the assembly into the dash opening. (Figure A) 2. Remove (4) screws and separate clips holding the factory door in place. (Figure A) 3. Remove the factory radio door and clip the climate controls back into the factory panel. (Figure A) 4.
PAGE 4
Installation instructions for part 95-8215S KNOWLEDGE IS POWER REV. 12/9/2014 INST95-8215S Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8215S Indice Toyota Avalon 2005-2010 95-8215S Desmontaje del tablero – Totota Avalon 2005-2010 ..................................... 2 Ensamble del kit – Provisión de radio doble DIN..................................
PAGE 6
95-8215S Desmontaje del tablero 1. Desenganche y quite la pequeña pieza de moldura del lado izquierdo del panel sobre el volante. (Figura A) 3. Desenganche y quite todo el panel que rodea el radio, incluyendo los controles del aire acondicionado. (Figura C) 2. Desenganche y quite el panel de arriba del volante. (Figura B) 4. Quite los (4) pernos de 10 mm que sostienen el radio.
PAGE 7
95-8215S Ensamble del kit Preparación del kit Provisión de radio ISO DDIN 1. Desenganche y quite temporalmente los botones del clima del panel de fábrica. 2. Quite (4) tornillos y separe los ganchos que sujetan la puerta de fábrica en su lugar. (Figura A) 3. Quite la puerta del radio de fábrica y enganche los controles del clima de nuevo en el panel de fábrica. 4.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8215S EL CONOCIMIENTO ESOWER PODER K NOWLEDGE IS P Mejore sus habilidades de instalación y fabricación REV. 12/9/2014 INST95-8215S Enhance your installation and fabrication skills by enrolling in the en most recognized and respected inscribiéndose la escuela de dispositivos electrónicos mobile school in our industry. móvileselectronics más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.