User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 95-8218S Double DIN Dash Installation Kit for Select 2007-2011 Toyota Camry Vehicle (Silver)

INSTALLATION INSTRUCTIONS FOR PART 95-8218S

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 9/12/2012 INST95-8218S

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in

beforereconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Table of Contents

• Double DIN head unit provision

• A) Radio Housing Trim Panel • B) (4) #4 x 3/8” Phillips Screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-1761 Toyota Harness 1987-up • TYTO-01 Toyota amp interface 2003-up

Antenna Adapter: • Not Required

• Panel removal tool • Phillips screwdriver • Socket Wrench

TOOLS REQUIRED

Toyota Camry 2007-2011

95-8218S

Dash Disassembly

– Toyota Camry 2007-2011 .................................... 2

Kit Assembly

– Double DIN head unit provision ............................ 3

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-8218S APPLICATIONS Table of Contents Toyota Camry 2007-2011 95-8218S Dash Disassembly –. Toyota Camry 2007-2011..................................... 2 Kit Assembly –. Double DIN head unit provision............................. 3 KIT FEATURES • Double DIN head unit provision KIT COMPONENTS • A) Radio Housing Trim Panel • B) (4) #4 x 3/8” Phillips Screws REV.
PAGE 2
95-8218S Dash Disassembly 1. Turn the shift knob counterclockwise to remove. 1 2 3 4 5 7. Unclip and remove the a/c vents above the radio. (Figure D) 6 2. Unclip and remove the (2) trim panels on each side of the pocket below the radio/climate control assembly. (Figure A) 3. Unclip and remove the shift knob trim panel. (Figure B) (Figure A) 8.
PAGE 3
95-8218S Kit Assembly 3. Slide the DDIN radio unit into the factory bracket/radio housing/ climate control assembly and secure the unit using the screws supplied with the head unit. (Figure B) Double DIN head unit provisions 1. Align the small legs on the bottom of the radio housing with the slots in the top of the climate control then slide the climate control sideways to engage together. (Figure A) 4. Locate the factory wiring harness in the dash.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 95-8218S KNOWLEDGE IS POWER REV. 9/12/2012 INST95-8218S Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8218S Aplicaciones Indice Toyota Camry 2007-2011 95-8218S Desmontaje del tablero –. Toyota Camry 2007-2011..................................... 2 Ensamble del kit –. Provisiones de unidad central doble DIN................ 3 Características del kit • Provisiones de unidad central doble DIN Componentes del kit • A) Panel de moldura para carcasa de radio • B) (4) tornillos Phillips #4 de 3/8” REV.
PAGE 6
95-8218S Desmontaje del tablero 1. Gire la perilla de la palanca de velocidades hacia la izquierda para quitarlo. 2. Desenganche y quite los (2) paneles de moldura de cada lado de la cavidad debajo del conjunto del radio/control de clima. (Figura A) 1 2 3 4 (Figura A) 5 1 2 7. Desenganche y quite las rejillas del aire acondicionado de arriba del radio. (Figura D) 6 3 4 5 8.
PAGE 7
95-8218S Ensamble del kit Provisiones de unidad central doble DIN 3. Deslice la unidad de radio DDIN en el conjunto de soporte/carcasa del radio/control de clima de fábrica y sujete la unidad utilizando los tornillos suministrados con la unidad central. (Figura B) 1. Alinee las pequeñas patas de la parte inferior de la carcasa del radio con las ranuras en la parte superior del control de clima, luego deslice el control de clima lateralmente para que se enganchen. (Figura A) 2.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8218S EL CONOCIMIENTO ESOWER PODER K NOWLEDGE IS P Mejore sus habilidades de instalación y fabricación REV. 9/12/2012 INST95-8218S Enhance your installation and fabrication skills by enrolling in the en most recognized and respected inscribiéndose la escuela de dispositivos electrónicos mobile school in our industry. móvileselectronics más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.