User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 95-8235CHG Double DIN Dash Installation Kit for 2012 Toyota Tacoma Vehicles (Charcoal High Gloss)

INSTALLATION INSTRUCTIONS FOR PART 95-8235CHG

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 9/19/2012 INST95-8235CHG

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in

beforereconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Table of Contents

• Double DIN head unit provision

• Painted Charcoal High-Gloss

• A) Radio Trim Panel • B) Brackets • C) Clock/Hazard Switch Bracket • D) (3) Panel Clips

• E) (6) #4 x 3/8” Phillips truss head screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-1761 Non Amplified Toyota Harness • TYTO-01 Amplified Toyota Interface

Antenna Adapter: • Not Required

• Panel removal tool • Phillips screwdriver • Socket Wrench

TOOLS REQUIRED

Toyota Tacoma 2012-up

95-8235CHG

A B

Dash Disassembly

– Toyota Tacoma 2012-up ....................................... 2

Kit Assembly

– Double DIN head unit provision ............................ 3

C D E

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-8235CHG APPLICATIONS Table of Contents Toyota Tacoma 2012-up 95-8235CHG Dash Disassembly – Toyota Tacoma 2012-up ....................................... 2 Kit Assembly – Double DIN head unit provision ............................ 3 KIT FEATURES • Double DIN head unit provision • Painted Charcoal High-Gloss REV.
PAGE 2
95-8235CHG Dash Disassembly TEXT PWR VOL 1. Unclip and remove A/C control panel. (Figure A) 4. Remove the left and right radio brackets from the radio chassis. (Figure D) SCAN 2. Remove (4) 10 mm bolts securing radio. (Figure B) 3. Unclip and remove entire panel including hazard switch and clock. (Figure C) 5. Unclip and remove the clock/ hazard switch assembly from the factory radio housing trim panel.
PAGE 3
95-8235CHG Kit Preparation Kit Assembly 1. Attach the clock/hazard switch bracket to the radio housing using the (6) #4 x 3/8” Phillips pan head screws. (Figure A) 1. Mount the radio to the radio brackets with the screws supplied with the radio. (Figure A) 2. Secure the radio/bracket assembly into the sub dash using the factory hardware. WARNING: DO NOT OVERTIGHTEN SCREWS. 2. Clip the clock/hazard switch assembly into the 95-8235CHG radio housing trim panel. (Figure B) 3.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 95-8235CHG REV. 9/19/2012 INST95-8235CHG KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8235CHG AplicAciones Indice Toyota Tacoma 2012-up 95-8235CHG Desmontaje del tablero – Toyota Tacoma 2012-up ....................................... 2 Ensamble del kit – Provisiones de unidad central doble DIN ............... 3 cArActerísticAs del kit • Provisión de unidad central doble DIN • Pintados de carbón de alto brillo REV.
PAGE 6
95-8235CHG Desmontaje del tablero TEXT PWR VOL 1. Desenganche y quite el panel del control del aire acondicionado. (Figura A) 4. Quite los soportes del radio izquierdo y derecho del chasís del radio. (Figura D) SCAN 2. Quite los (4) pernos de 10 mm que sostienen el radio. (Figura B) 3. Desenganche y quite todo el panel, incluyendo el interruptor de las luces intermitentes y el reloj. (Figura C) 5.
PAGE 7
95-8235CHG Preparación del kit Ensamble del kit Provisiones de unidad central doble DIN 1. Coloque el soporte del reloj/ interruptor de las luces intermitentes en la carcasa del radio utilizando los (6) tornillos Phillips de cabeza troncocónica #4 x 3/8”. (Figura A) 1. Monte el radio en los soportes con los tornillos que vienen con el radio. (Figura A) 2. Sujete el conjunto del radio/ soporte al sub tablero utilizando la tornillería de fábrica. ADVERTENCIA: NO APRIETE EXCESIVAMENTE LOS TORNILLOS. 2.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8235CHG REV. 9/19/2012 INST95-8235CHG EL CONOCIMIENTO ESOWER PODER K NOWLEDGE IS P Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by enrolling in the en most recognized and respected inscribiéndose la escuela de dispositivos electrónicos mobile school in our industry. móvileselectronics más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.