User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 95-8239B Double DIN Dash Installation Kit for Select 2012-UP Toyota Prius Vehicle (Matte Black)

METRA. The World’s best kits.

™

metraonline.com

REV. 8/17/2015 INST95-8239B

Installation instructions for part 95-8239B

CAUTION!

Metra recommends disconnecting the negative bat

tery terminal before beginning any installation, unless the vehicle

manufacturer recommends against so. Please check with your local

Dealership for more information. All accessories, switches, climate

controls panels, and especially air bag indicator lights must be con

nected before reconnecting the battery or cycling the ignition. Also,

do not remove the factory radio with the key in the on position, or the

vehicle running. It would be best to remove the key from the ignition

and then wait a few seconds before removing the factory radio.

• ISO DDIN radio provision

• Painted Matte Black

• A) Radio Trim Panel • B) Radio Brackets • C) (2) #8 x 3/8 Phillips Truss Head Screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-1761

Antenna Adapter: • 40-LX11

• Panel removal tool • Phillips screwdriver • Socket Wrench

TOOLS REQUIRED

Toyota Prius C 2012-2014

95-8239B

Dash Disassembly ................................................. 2

Kit Assembly

– ISO DDIN radio provision ...................................... 3

Table of Contents

B C

Summary of content (8 pages)

PAGE 1
Installation instructions for part 95-8239B Toyota Prius C 2012-2014 95-8239B Table of Contents Dash Disassembly.................................................. 2 Kit Assembly –. ISO DDIN radio provision....................................... 3 KIT FEATURES • ISO DDIN radio provision • Painted Matte Black KIT COMPONENTS • A) Radio Trim Panel • B) Radio Brackets • C) (2) #8 x 3/8 Phillips Truss Head Screws REV.
PAGE 2
95-8239B Dash Disassembly 1. Unclip and remove the trim panel from around the radio including the hazard switch. (Figure A) 2. Remove (4) 8mm bolts securing the factory radio, then unplug and remove the radio.
PAGE 3
95-8239B Kit Assembly ISO DDIN radio provision 1. Secure the radio brackets to the radio trim panel using (2) #8 x 3/8” Phillips truss head screws supplied. (Figure A) 2. Secure the radio to the radiobracket/trim assembly using screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or AXXESS.
PAGE 4
Installation instructions for part 95-8239B IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling. KNOWLEDGE IS POWER REV.
PAGE 5
Instrucciones de instalación para la pieza 95-8239B Toyota Prius C 2012-2014 95-8239B Indice Desmontaje del tablero.......................................... 2 Ensamble del kit –. Provisión de radio ISO DDIN.................................. 3 CARACTERÍSTICAS DEL KIT • Provisión de radio ISO DDIN • Pintura negro mate COMPONENTES DEL KIT • A) Panel de moldura para radio • B) Soportes para radio • C) (2) tornillos Phillips de cabeza segmentada #8 de 3/8” REV.
PAGE 6
95-8239B Desmontaje del tablero 1. Desenganche y quite el panel de moldura que rodea el radio que incluyendo el interruptor de las luces intermitentes. (Figura A) 2. Retire los (4) pernos de 8mm que sujetan el radio de fábrica a continuación, desenchufe y quitar la radio.
PAGE 7
95-8239B Ensamble del kit Provisión de radio ISO DDIN 1. Atornille los soportes del radio al panel de moldura del radio con los (2) tornillos Phillips de cabeza segmentada #8 de 3/8” suministrados. (Figura A) 2. Atornille el radio al ensamble del soporte de radio/panel de moldura con los tornillos que vienen con el radio. (Figura B) 3. Localice el arnés de cableado de fábrica y el conector de la antena en el tablero y haga todas las conexiones necesarias al radio.
PAGE 8
Instrucciones de instalación para la pieza 95-8239B IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente como se indica en las instrucciones. Por favor tenga el vehículo desarmado y listo para ejecutar los pasos de resolución de problemas antes de llamar.