User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 95-8240B Toyota Prius 2004-09 Black Double DIN Stereo Dash Kit (Matte black)

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 1/3/2014 INST95-8240B

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 95-8240B

• Double DIN radio provision

• Painted matte black

• A) Radio trim panel • B) Brackets • C) 4 Plastic panel clips • D) Resistor

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-1761 - Toyota 1987-up • TYTO-01 - LEX/TOY amp interface 2001-up

Antenna Adapter: • Not required

• Panel removal tool • Phillips screwdriver • Socket wrench

TOOLS REQUIRED

Toyota Prius 2004-2009

95-8240B

Dash Disassembly

– Toyota Prius 2004-2009 ....................................... 2

Kit Assembly

– Double DIN radio provision ................................... 3

Climate Control Wiring .......................................... 3

Table of Contents

A B C D

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-8240B APPLICATIONS Table of Contents Toyota Prius 2004-2009 95-8240B Dash Disassembly – Toyota Prius 2004-2009 ....................................... 2 Kit Assembly – Double DIN radio provision ................................... 3 KIT FEATURES • Double DIN radio provision • Painted matte black Climate Control Wiring .......................................... 3 KIT COMPONENTS • A) Radio trim panel • B) Brackets • C) 4 Plastic panel clips • D) Resistor REV.
PAGE 2
95-8240B Dash Disassembly 1. Unsnap panel with vent on driver’s side and remove. (Figure A) 7. Remove (2) Phillips screws from flip open panel below radio, unclip and remove. (Figure E) 2. Remove (2) Phillips screws on panel below steering column with hood release on it and remove panel. (Figure A) 3. Unclip and remove panel surrounding under side of steering column. (Figure B) 8. Remove (2) 10mm bolts from info center display above radio, unclip and remove. (Figure F) 9.
PAGE 3
95-8240B Climate Control Wiring 1. Attach the included four plastic panel clips to the radio trim panel. (Figure A) For the climate controls to operate properly, the following steps need to be followed: (Figure A) 2. Mount the radio between the radio brackets and secure with screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 1.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 95-8240B KNOWLEDGE IS POWER REV. 1/3/2014 INST95-8240B Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.