User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 95-8721B Double DIN Dash Kit for Select 2005-2007 Mercedes-Benz Vehicles (Black)

REV. 5/13/2016 INST95-8721B

Table of Contents

METRA. The World’s best kits.

™

metraonline.com

Installation instructions for part 95-8721B

CAUTION!

All accessories, switches, climate controls panels, and

especially air bag indicator lights must be connected before cycling

the ignition. Also, do not remove the factory radio with the key in the

on position, or while the vehicle is running.

• Double DIN radio provision

• Painted matte black

• A) Radio housing trim panel • B) Brackets • C) (4) #8 x 3/8” Phillips screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • XSVI-9005-NAV

Antenna Adapter: • 40-EU10

• Panel removal tool • Phillips screwdriver • Socket wrench • Torx driver

TOOLS REQUIRED

Mercedes-Benz C-Class 2005-2007

95-8721B

B C

Dash Disassembly .............................................. 2-3

Kit Assembly

– Double DIN radio provision ................................... 3

Summary of content (8 pages)

PAGE 1
Installation instructions for part 95-8721B Mercedes-Benz C-Class 2005-2007 95-8721B Table of Contents Dash Disassembly............................................... 2-3 Kit Assembly –. Double DIN radio provision.................................... 3 KIT FEATURES • Double DIN radio provision • Painted matte black KIT COMPONENTS • A) Radio housing trim panel • B) Brackets • C) (4) #8 x 3/8” Phillips screws REV.
PAGE 2
95-8721B OFF ESP Dash Disassembly 2 1. Unclip and remove cover around shift lever and cup holder. (Figure A) 3 4. Inside each vent, using a small flat screwdriver push the lower tab inward toward the center of the vent and then rotate each vent up to expose (1) Torx head screw. Loosen the Torx screws (It is not F 4 72 64 80 5 64 72 6 80 F FRON T AUT O A/C REAR 2. Unclip and remove ashtray assembly. (Figure B) 3.
PAGE 3
95-8721B Dash Disassembly Kit Assembly Double DIN radio provision 5. Unclip and remove the vent assembly. (Figure E) 1. Attach the brackets to the radio housing trim panel trim plate with the supplied #8 x 3/8” screws. (Figure A) 6. Unclip and remove the push button panel above the radio (Figure F) 7. Remove (4) Torx screws securing factory radio then remove the unit. (Figure G) 2.
PAGE 4
Installation instructions for part 95-8721B IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling. KNOWLEDGE IS POWER REV.
PAGE 5
Instrucciones de instalación para la pieza 95-8721B Mercedes-Benz C-Class 2005-2007 95-8721B Indice Desmontaje del tablero ...................................... 2-3 Ensamble del kit –. Provisión de radio doble DIN................................. 3 CARACTERÍSTICAS DEL KIT • Provisión de radio doble DIN • Pintura negro mate COMPONENTES DEL KIT • A) Panel de moldura para carcasa de radio • B) Soportes • C) Cavidad • D) (4) tornillos #8 x 3/8” REV.
PAGE 6
95-8721B OFF ESP Desmontaje del tablero 2 1. Desenganche y quite la tapa de alrededor de la palanca de velocidades y el portavasos. (Figura A) 3 4. Dentro de cada rejilla, con un pequeño destornillador, presione la pestaña inferior hacia adentro, hacia el centro de la rejilla, y luego gire cada rejilla hacia arriba para exponer (1) tornillo de cabeza Torx. Afloje los tornillos Torx (no es necesario quitar F 4 72 64 80 5 64 72 6 80 F FRON T AUT O A/C REAR 2.
PAGE 7
95-8721B Desmontaje del tablero Ensamble del kit Provisiones de radio doble DIN 5. Desenganche y quite el ensamble de la rejilla. (Figura E) 1. Una los soportes al panel de la moldura de la carcasa del radio con los tornillos #8 x 3/8” suministrados. (Figura A) 6. Desenganche y quite el panel del botón de presión de arriba del radio. (Figura F) 7. Quite los (4) tornillos Torx que sujetan el radio de fábrica para quitar la unidad. (Figura G) 2.
PAGE 8
Instrucciones de instalación para la pieza 95-8721B IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente como se indica en las instrucciones. Por favor tenga el vehículo desarmado y listo para ejecutar los pasos de resolución de problemas antes de llamar.