Owner's Manual

gS-gOOO KIT )\§§EMBLY
I
DOUBLE DIN / STACKED ISO DIN HEAD UNIT
PROVISIONS
*Note: Refer also to the instructions Included with the aftermarket radio.
A
1 Determine whether the radiol kit
assembly will be mounted on top of
a surface or under it (over dash vs.
under dash ... ), and then mount the
radio accordingly.
2 Mount the brackets to the head unit
with the screws supplied with the unit.
(Figure A)
3 Place the radio into the housing and
rout wires and antenna through the
holes provided on the back of the
housing. (Figure B)
4 Place the support plate over it and
align the slots from the support plate
with the brackets. (Figure B)
5 Mount the radio I housing assembly
to the dash. (Figure C)
1