User Manual

ManualsBrandsMetra ManualsAudio & Video AccessoriesMetra95-9011B Double DIN Mount Kit for 2005-Up Volkswagen Vehicles, (Matte black)

INSTALLATION INSTRUCTIONS FOR PART 95-9011

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 12/17/2013 INST95-9011

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Applications

• A) Radio Housing • B) DDIN Brackets • C) DDIN Trim Plate

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • XSVI-9003-NAV VW Interface 2002-up

Antenna Adapter: • 40-EU55-adapter for amplified antenna 2002-up • 40-EU56 antenna adapter

• Panel removal tool • Phillips screwdriver • Socket Wrench

TOOLS REQUIRED

Volkswagen multi-kit 2005-up

95-9011

KIT FEATURES

• Double DIN radio provision

B CA

Beetle 2012-up

CC 2009-up

Eos 2007-up

Jetta GLI 2008-up

GTI 2006-up

Golf, Golf R 2010-up

Jetta 2005-up

Jetta SportWagen 2010-up

Passat 2006-up

R32 2007-2008

Rabbit 2007-2009

Tiguan 2009-up

Summary of content (16 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-9011 Applications Volkswagen multi-kit 2005-up 95-9011 Beetle CC Eos Jetta GLI GTI Golf, Golf R Jetta Jetta SportWagen Passat R32 Rabbit Tiguan KIT FEATURES • Double DIN radio provision KIT COMPONENTS • A) Radio Housing • B) DDIN Brackets • C) DDIN Trim Plate REV.
PAGE 2
95-9011 Table of Contents Dash Disassembly Dash Disassembly – – – – – – – – – – – – – – – – Jetta GLI 2008-2010 GTI 2006-2009 New Jetta 2005-2010 Rabbit 2007-2009 R32 2007-2008 CC 2009-up Passat 2006-2010 Passat 2012-up Jetta SportWagen 2010-up Jetta 2011-up Jetta GLI 2012-up GTI 2010-up Golf, Golf R 2010 Tiguan 2009-up Eos 2007-up Beetle 2012-up New Jetta 2005-2010, Jetta GLI 2008-2010, GTI 2006-2009 Rabbit 2007-2009, R32 2007-2008 2 2 2 2 2 3 3 3 3 3 3 3 3 4 4 5 1.
PAGE 3
95-9011 Dash Disassembly CC 2009-up, Passat 2006-2010, Jetta SportWagen 2010-up, Jetta 2011-up, Golf, Golf R 2010, GTI 2010-up Continued from page 2 5. Unclip and remove the grille from the top-center of dash. (Figure E) 6. Remove one T-20 Torx screw from black insert from under grille removed in step one. (Figure F) 7. Remove insert. (Figure G) FM2 FM 1. Unclip and remove trim panel surrounding radio. (Figure A) 2. Remove (4) T-20 Torx screws to remove radio. Continue to kit assembly (Figure F) 8.
PAGE 4
95-9011 Dash Disassembly Tiguan 2009-up Eos 2007-up 1. Unclip and remove passenger air bag light panel to the right of the hazard light button. (Figure A) 2. Unclip and remove the panel with the two slots in it to the left of the hazard light button. (Figure A) 3. Remove (2) T-20 Torx screws exposed behind the two panels removed in the two previous steps. (Figure B) 4. Unclip and remove the trim panel surrounding the radio. (Figure C) 5. Remove (4) T-20 Torx screws securing the radio.
PAGE 5
95-9011 Dash Disassembly Beetle 2012-up 1. Unclip and remove the small trim around radio. (Figure A) 2. Unclip and remove larger trim around radio including the a/c vents. (Figure B) 3. Remove (4) Torx screws securing radio to remove the radio.
PAGE 6
95-9011 Kit Assembly Double DIN radio provision 1. Snap the DDIN brackets to the inside edge of the radio housing. (Figure A) 2. Slide the DDIN radio into the DDIN bracket/radio housing assembly and secure the radio to the kit using the screws supplied with the radio. (Figure B) 3. Snap the DDIN trim-plate onto the housing/radio assembly. (Figure B) 4. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS.
PAGE 7
95-9011 7
PAGE 8
INSTALLATION INSTRUCTIONS FOR PART 95-9011 KNOWLEDGE IS POWER REV. 12/17/2013 INST95-9011 Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 9
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-9011 Volkswagen multi-kit 2005 y mas 95-9011 CArACterístiCAs del kit • Provisión de radio doble DIN Componentes del kit • A) Carcasa del radio • B) Soportes DDIN • C) Placa de moldura DDIN REV.
PAGE 10
95-9011 Indice Desmontaje del tablero Desmontaje del tablero – Jetta GLI 2008-2010 – GTI 2006-2009 – New Jetta 2005-2010 – Rabbit 2007-2009 – R32 2007-2008 – CC 2009 y mas – Passat 2006-2010 – Passat 2012y mas – Jetta SportWagen 2010y mas – Jetta 2011y mas – Jetta GLI 2012y mas – GTI 2010y mas – Golf, Golf R 2010 – Tiguan 2009y mas – Eos 2007y mas – Beetle 2012y mas 2 2 2 2 2 3 3 3 3 3 3 3 3 4 4 5 Ensamble del kit – Provisión de radio doble DIN 6 New Jetta 2005-2010, Jetta GLI 2008-2010, GTI 2006-200
PAGE 11
95-9011 Desmontaje del tablero CC 2009 y mas, Passat 2006-2010, Jetta SportWagen 2010 y mas, Jetta 2011y mas, Golf, Golf R 2010, GTI 2010y mas Viene de la página 2 5. Desenganche y quite la rejilla del centro superior del tablero. (Figura E) 6. Quite el tornillo Torx T-20 del inserto negro debajo de la rejilla que quitó en el paso uno. (Figura F) 7. Quite el inserto. (Figura G) 1. Desenganche y quite el panel de la moldura que rodea el radio. (Figura A) 2.
PAGE 12
95-9011 Desmontaje del tablero Tiguan 2009 y mas Eos 2007 y mas 1. Desenganche y quite el panel del foco de la bolsa de aire del pasajero a la derecha del botón de las luces intermitentes. (Figura A) 2. Desenganche y quite el panel que tiene dos ranuras a la izquierda del botón de las luces intermitentes. (Figura A) 3. Quite los (2) tornillos Torx T-20 expuestos detrás de los dos paneles que quitó en los dos pasos anteriores. (Figura B) 4. Desenganche y quite el panel de moldura que rodea el radio.
PAGE 13
95-9011 Desmontaje del tablero Beetle 2012 y mas 1. Desenganche y quite la pequeña moldura que rodea el radio. (Figura A) 2. Desenganche y quite la moldura más grande que rodea el radio, incluyendo las rejillas del aire acondicionado. (Figura B) 3. Quite los (4) tornillos Torx que sujetan el radio para quitarlo.
PAGE 14
95-9011 Ensamble del kit Provisión de radio doble DIN 1. Coloque a presión los soportes DDIN en el borde interior de la carcasa del radio. (Figura A) 2. Deslice el radio DDIN en el soporte/ ensamble de carcasa del radio DDIN y sujete el radio al kit utilizando los tornillos suministrados con el radio. (Figura B) 3. Coloque a presión la placa de la moldura DDIN en la carcasa/conjunto del radio. (Figura B) 4. Ubique el arnés de cableado de fábrica en el tablero.
PAGE 15
95-9011 7
PAGE 16
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-9011 EL CONOCIMIENTO ESOWER PODER K NOWLEDGE IS P Mejore sus habilidades de instalación y fabricación REV. 12/17/2013 INST95-9011 Enhance your installation and fabrication skills by enrolling in the en most recognized and respected inscribiéndose la escuela de dispositivos electrónicos mobile school in our industry. móvileselectronics más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.