Installation Instructions

ManualsBrandsMetra Manualscar kitsMetra Radio Installation Kit

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

Metra. The World’s Best Kits.



INSTALLATION INSTRUCTIONS

95-3025B

KIT FEATURES

• ISO DDIN radio provision

• Painted to match the factory ﬁnish

KIT COMPONENTS

• A) Radio housing • B) Radio brackets

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• 9/32” Socket wrench

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Assembly ..........................................................3

WIRING & ANTENNA CONNECTIONS

(sold separately)

Wiring Harness: TBA

Antenna Adapter: 40-EU55

A B

Buick Encore 2013-2016

Summary of content (4 pages)

PAGE 1
95-3025B I N S TA L L AT I O N I N S T R U C T I O N S Buick Encore 2013-2016 KIT FEATURES • ISO DDIN radio provision • Painted to match the factory finish TABLE OF CONTENTS Dash Disassembly...................................................2 Kit Assembly...........................................................
PAGE 2
DASH DISASSEMBLY 1. Unclip, unplug and remove the dash panel surrounding the radio. 2. Remove (4) 9/32” screws securing the radio/climate control panel, then unplug and remove. 3. Remove (2) 9/32” screws securing the radio chassis, then unplug and remove. Please visit Metraonline.com for Dash Disassembly illustrations. Continue to Kit Assembly 2 1.800.221.0932 | MetraOnline.
PAGE 3
KIT ASSEMBLY ISO DDIN radio provision 1. Attach the radio brackets to the radio using the screws supplied with the radio. (Figure A) 2. Locate the factory wiring harness and connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation. (Figure A) 3. Slide the radio/bracket assembly into the radio cavity in the sub dash. (Figure B) 4.
PAGE 4
95-3025B I N S TA L L AT I O N I N S T R U C T I O N S IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.