Installation Instructions

386.257.1187
|
MetraOnline.com
2
1. Unclip, unplug, and remove the climate
control panel. (Figure A)
2. Unclip and remove the dashboard/
vent trim panel surrounding the radio
display. (Figure B))
3. Remove (4) 9/32” screws securing the
radio display, then unplug and remove
the display. (Figure C)
Continue to Kit Preparation
(Figure A)
(Figure B)
DASH DISASSEMBLY KIT PREPARATION
Remove shaded area
(Figure A)
(Figure B)
(Figure C)
1. Cut the sub-dash to allow room for the
aftermarket radio. (Figure A)
Note – do not cut into snap locations.
2. Attach (4) panel clips provided onto the
radio trim panel. (Figure B)
Continue to Kit Assembly