Instructions

ManualsBrandsMetra ManualsAudioMetra Hyundai Santa Fe 2010-2012 With Nav Installation Kit

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 11/25/2014 INST95-7361S

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Installation Instructions for 95-7361S

• ISO DDIN radio provision

• Painted silver

• A) Radio housing trim panel • B) Brackets • C) (4) #8 x 3/8” Phillips screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7303

Antenna Adapter: • 40-KI11

• Panel removal tool • Phillips screwdriver

TOOLS REQUIRED

Hyundai Santa Fe

(with factory NAV)

2010-2012

95-7361S

B C

Dash Disassembly

– Hyundai Santa Fe (w/factory NAV) 2010-2012 ....... 2

Kit Assembly

– ISO DDIN radio provision ...................................... 3

Table of Contents

Summary of content (8 pages)

PAGE 1
Installation Instructions for 95-7361S Table of Contents Hyundai Santa Fe (with factory NAV) 2010-2012 95-7361S Dash Disassembly – Hyundai Santa Fe (w/factory NAV) 2010-2012 ....... 2 Kit Assembly – ISO DDIN radio provision ...................................... 3 KIT FEATURES • ISO DDIN radio provision • Painted silver KIT COMPONENTS • A) Radio housing trim panel • B) Brackets • C) (4) #8 x 3/8” Phillips screws REV.
PAGE 2
95-7361S Dash Disassembly 1. Remove (1) Phillips screw from the right side of the panel below the steering column then unclip and let right side of panel hang. (Figure A) 2. Unclip and remove the cover above the clock on top of panel surrounding the radio. (Figure B) 3. Unclip and remove the panel extending across the dash below the a/c control and above the glove box including the ash tray. (Figure C) (Figure A) (Figure B) (Figure C) (Figure D) 4.
PAGE 3
95-7361S Kit Assembly ISO DDIN radio provision 1. Connect the radio brackets to the radio housing with (4) #8 x 3/8” Phillips screws supplied. (Figure A) 2. Slide the radio into the assembly and secure with screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. (Figure A) (Figure B) 4.
PAGE 4
Installation Instructions for 95-7361S KNOWLEDGE IS POWER REV. 11/25/2014 INST95-7361S Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7361S AplicAciones Indice Hyundai Santa Fe (con NAV de fábrica) 2010-2012 95-7361S Desmontaje del tablero – Hyundai Santa Fe (con NAV de fábrica) 2010-2012.... 2 Ensamble del kit – Provisión de radio ISO DDIN .................................. 3 cArActerísticAs del kit • Provisión de radio ISO DDIN • Pintura color plata componentes del kit • A) Panel de moldura para la carcasa del radio • B) Soportes • C) (4) tornillos Phillips #8 de 3/8” REV.
PAGE 6
95-7359B Desmontaje del tablero 1. Quite (1) tornillo Phillips del lado derecho del panel debajo de la columna de dirección y suelte y deje que el lado derecho del panel cuelgue. (Figura A) 2. Desenganche y quite la tapa sobre el reloj en la parte superior del panel que rodea el radio. (Figura B) 3. Desenganche y quite el panel que se extiende a lo largo del tablero debajo del control del aire acondicionado y arriba de la guantera, incluyendo el cenicero.
PAGE 7
95-7359B Ensamble del kit Provisión de radio ISO DDIN 1. Conecte los soportes del radio con la carcasa del radio con los (4) tornillos Phillips #8 x 3/8” suministrados. (Figura A) 2. Deslice el radio en el conjunto del soporte y sujételo con los tornillos suministrados con el radio. (Figura B) 3. Ubique el arnés de cableado de fábrica y el conector de la antena en el tablero. ..Metra recomienda el uso de los adaptadores adecuados de acoplamiento de Metra y/o AXXESS. (Figura A) (Figura B) 4.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7361S EL CONOCIMIENTO ESOWER PODER K NOWLEDGE IS P Mejore sus habilidades de instalación y fabricación REV. 11/25/2014 INST95-7361S Enhance your installation and fabrication skills by enrolling in the en most recognized and respected inscribiéndose la escuela de dispositivos electrónicos mobile school in our industry. móvileselectronics más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.