Installation Guide

95-7365B
Kit Assembly
Double DIN radio provision
1. Mountthebracketstotheradio
withthescrewssuppliedwiththe
radio.(FigureA)
2. Snaptheradiohousingtrimpanel
intothefactorytrimbezelfromthe
backsideofthebezel.(FigureB)
3. Locatethefactorywiringharness
andantennapluginthedashand
makeallnecessaryconnectionsto
thenewradio.Metrarecommends
usingthepropermatingadapters
fromMetraand/orAXXESS.
4. Afterconnectingallwiring,mount
thenewradioassemblyintothe
dashwiththefactoryscrewsand
reassemblethedashinreverse
orderofdisassembly.
3
(Figure A) (Figure B)