Installation Guide

ManualsBrandsMetra ManualsAudioMetra Hyundai Venue 2020-Up Installation Kit

Metra. The World’s Best Kits.

INSTALLATION INSTRUCTIONS

95-7398

Attention! Let the vehicle sit with the key

out of the ignition for a few minutes before

removing the factory radio. When testing the

aftermarket equipment, ensure that all factory

equipment is connected before cycling the

key to ignition.

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) Panel clips (5) • D) Panel clip legs (3) • E) #4 Phillips screws (12)

TOOLS REQUIRED

• Panel removal tool • Socket wrench

• Phillips screwdriver • Cutting tool

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Preparation ....................................................2-3

Kit Assembly ..........................................................3

WIRING & ANTENNA CONNECTIONS

(sold separately)

See metra-online.com or axxessinterfaces.com

for audio and SWC interface options

Antenna Adapter: 40-KI11

A C D

Hyundai Venue 2020-Up

Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle

speciﬁc applications

KIT FEATURES

• ISO DDIN radio provision

• Painted scratch resistant matte black with silver vent trim

Summary of content (4 pages)

PAGE 1
95-7398 I N S TA L L AT I O N I N S T R U C T I O N S Hyundai Venue 2020-Up Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications KIT FEATURES • ISO DDIN radio provision • Painted scratch resistant matte black with silver vent trim KIT COMPONENTS • A) Radio trim panel • B) Radio brackets • C) Panel clips (5) • D) Panel clip legs (3) • E) #4 Phillips screws (12) A B C TABLE OF CONTENTS Dash Disassembly.......................................
PAGE 2
DASH DISASSEMBLY 1. Unclip and remove the center dash trim panel which includes the a/c vents. This panel is incredibly difficult to remove. Start from the top clips then work down. (Figure A) 2. Remove (4) Phillips screws securing the radio. Slide the radio out, then unplug and remove. (Figure B) 1. Cut and remove the area marked in the sub dash and bend metal bracket out of the way to make room for the radio chassis. (Figure A) (Figure A) 3.
PAGE 3
KIT PREPARATION (CONT.) KIT ASSEMBLY 3. Secure the factory a/c vents to the radio trim panel using the factory hardware. Screws have also been provided if needed. (Figure C) 1. Attach the radio brackets to the radio using screws supplied with the radio, and then secure into the dash opening (Figure A. 4. Secure the (3) panel clip legs to the radio trim panel with (6) #4 screws provided. (Figure D) 2.
PAGE 4
95-7398 I N S TA L L AT I O N I N S T R U C T I O N S Having difficulties? We’re here to help. Contact our Tech Support line at: 386-257-1187 Or via email at: techsupport@metra-autosound.com Tech Support Hours (Eastern Standard Time) Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 7:00 PM Sunday: 10:00 AM - 4:00 PM ® KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.