Installation Guide

6
386.257.1187
|
MetraOnline.com
(Figure E)
(Figure F)
(Figure G)
5. Secure the display and bracket assembly
to the radio chassis using (4) screws
supplied with the radio. (Figure E)
6. Slide the radio assembly into the radio
housing assembly through the front,
then secure it to the assembly using
screws supplied with the radio.
(Figure F)
7. Clip the radio trim panel onto the radio
housing assembly. (Figure G)
8. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
9. Secure the radio assembly to the dash
using the factory screws.
10. Snap the factory trim panel to the dash
to complete the installation.
KIT ASSEMBLY (CONT.)