Installation Guide

ManualsBrandsMetra ManualsAudioMetra Car Stereo Installation Kit

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 5/2/2014 INST95-8244HG

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 95-8244HG

• Double DIN radio provision

• Painted high-gloss black

• A) Radio housing • B) Radio brackets • C) (1) Passenger Air Bag Light board cover • D) (2) Panel clip mounts

• E) (7) #4 x 3/8” pan-head Phillips screws • F) (1) Air-Bag sticker (not shown)

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-1761 Toyota wire harness • TYTO-01 Toyota amplified interface

Antenna Adapter: • 40-LX11 Toyota/Lexus antenna adapter

• Panel removal tool • Phillips screwdriver

• Socket wrench

TOOLS REQUIRED

Toyota Avalon 2013-up

95-8244HG

B C D

Dash Disassembly

– Toyota Avalon 2013-up .....................................2-5

Kit Preparation

– ............................................................................ 6

Kit Assembly

– Double DIN radio provision ................................... 7

Table of Contents

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-8244HG APPLICATIONS Table of Contents Toyota Avalon 2013-up 95-8244HG Dash Disassembly – Toyota Avalon 2013-up .....................................2-5 Kit Preparation – ............................................................................ 6 KIT FEATURES • Double DIN radio provision • Painted high-gloss black Kit Assembly – Double DIN radio provision ...................................
PAGE 2
95-8244HG Dash Disassembly 1. Unclip and remove the a/c vent panel above the factory radio and surrounding the instrument cluster. (Figure A) 3. Remove (4) 10mm bolts (2 on top and 2 on bottom) securing the factory radio then unclip and remove. (Figure C,D) Upper bolts Tip: Start at the passenger side of the panel. 2. Unclip and remove the panel below the factory radio.
PAGE 3
95-8244HG Dash Disassembly 4. Remove (4) small Phillips screws securing the panel clip and screw mount to the factory radio. Retain for kit assembly. (Figure E) 5. Remove (9) small Phillips screws securing the radio chassis to the main panel of the factory radio.
PAGE 4
95-8244HG Dash Disassembly 6. Remove (2) remaining Phillips screws securing the Passenger Air Bag Light board to the main factory radio panel. Retain board for kit assembly. (Figure G) 7. Remove the remaining (2) yellow panel clips and retain for kit assembly.
PAGE 5
95-8244HG 8. Remove (2) Phillips screws and then unclip the chrome trim around the outside of the radio/climate control assembly. Retain for kit assembly. (Figure I) 9. Remove the radio brackets and the climate control from the factory radio. Retain climate control for kit assembly.
PAGE 6
95-8244HG Kit Preparation 1. Attach the Passenger Air Bag Light board to the radio housing with the factory hardware. (Figure A) 2. Attach the Passenger Air Bag Light board cover to the radio housing panel over the Passenger Air Bag Light board using (3) of the #4 x 3/8” Phillips screws supplied. (Figure A) 3. Apply the supplied Air Bag Sticker to the face of the radio housing. (Figure A) 4. Attach the panel clip and screw mount to the radio housing using the factory hardware. (Figure B) 5.
PAGE 7
95-8244HG Kit Assembly Double DIN radio provision 1. Mount the radio brackets to the radio with the screws supplied with the radio. (Figure A) 3. Mount the radio/bracket assembly to the radio housing/climate control assembly with the factory hardware. 4. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 5. Reassemble dash in reverse order of disassembly.
PAGE 8
INSTALLATION INSTRUCTIONS FOR PART 95-8244HG KNOWLEDGE IS POWER REV. 5/2/2014 INST95-8244HG Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.