Installation Guide

95-8244HG
2
1. Unclip and remove the a/c vent
panel above the factory radio and
surrounding the instrument cluster.
(Figure A)
Tip: Start at the passenger side
of the panel.
2. Unclip and remove the panel below
the factory radio. (Figure B)
Dash Disassembly
3. Remove (4) 10mm bolts (2 on
top and 2 on bottom) securing
the factory radio then unclip and
remove. (Figure C,D)
Upper bolts
Lower bolts
(Figure A) (Figure C)
(Figure B) (Figure D)