Installation Guide

ManualsBrandsMetra ManualsAudioMetra Mercedes Benz S Class 2000-2006 Car Dash Kit

Metra. The World’s Best Kits.



INSTALLATION INSTRUCTIONS

95-8734

Attention! Let the vehicle sit with the key

out of the ignition for a few minutes before

removing the factory radio. When testing the

aftermarket equipment, ensure that all factory

equipment is connected before cycling the

key to ignition.

KIT FEATURES

• ISO DDIN radio provision

• 95-8734B is scratch resistant matte black

• 95-8734W is woodgrain

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) Panel brackets • D) #6 x 3/8” Phillips screws (2) • E) Panel clips (2)

A B C D E

Mercedes-Benz S Class 2000-2006

Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle

speciﬁc applications

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• Torx T20 screwdriver

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Preparation .......................................................3

Kit Assembly ..........................................................3

WIRING & ANTENNA CONNECTIONS

(sold separately)

Wiring Harness: Visit metraonline.com for

harness and interface information

Antenna Adapter: 40-VW12 or 40-EU10

Summary of content (4 pages)

PAGE 1
95-8734 I N S TA L L AT I O N I N S T R U C T I O N S Mercedes-Benz S Class 2000-2006 Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications KIT FEATURES • ISO DDIN radio provision • 95-8734B is scratch resistant matte black • 95-8734W is woodgrain WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: Visit metraonline.
PAGE 2
DASH DISASSEMBLY 2000-2002 2003-2006 1. Open the ashtray compartment door, remove (2) Torx T20 screws securing the ashtray assembly, then remove and unplug the ashtray assembly. (Figure A) 1. Open the ashtray compartment door, remove (2) Torx T20 screws securing the ashtray assembly, then remove and unplug the ashtray assembly. (Figure A) 2. Unclip, unplug, and remove the climate control panel surrounding the radio, then remove the panel. (Figure B) 2.
PAGE 3
KIT PREPARATION 1. Attach the panel brackets to the radio trim panel with the two supplied #6 x 3/8” Phillips screws. (Figure A) KIT ASSEMBLY 1. Attach the (2) supplied panel clips to the radio housing. (Figure A) 2. Attach the radio brackets to the radio using screws supplied with the radio, and then secure into the dash opening. (Figure B) 2. Secure the climate control to the radio trim panel with the factory screws. (Figure B) Continue to Kit Assembly (Figure A) 3.
PAGE 4
95-8734 I N S TA L L AT I O N I N S T R U C T I O N S Having difficulties? We’re here to help. Contact our Tech Support line at: 386-257-1187 Or via email at: techsupport@metra-autosound.com Tech Support Hours (Eastern Standard Time) Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 7:00 PM Sunday: 10:00 AM - 4:00 PM ® KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.