Owner's Manual

1. Remove DIN sleeve from receiver.

2. Place insert ring into opening in mounting

bracket.

3. Slide DIN sleeve into opening. Secure sleeve

to mounting bracket and insert ring by bending

the securing tabs (Inset).

4. Slide receiver into DIN Sleeve.

5. If not installing an equalizer, snap EQ cover

plate into lower opening of the mounting

bracket.

6. Install receiver assembly in the vehicle

following instructions in the Mastersheet for

your particular vehicle.

IMPORTANT

Installation Kit

120 99-2001

Before starting, compare items on your invoice with items

received. Carefully check through packaging material.

If an item is missing, please call:

Crutchfield

Parts Supplied

Mounting

Bracket

Insert Ring

GM Vehicles

Revision 9/25/12

Receiver Assembly

DIN Sleeve

Securing Tabs

(Bend tabs after sleeve

is inside opening in bracket)

Mounting Bracket

INSET

Insert Ring

EQ Cover Plate

Tools Required



Flat Blade

Screwdriver

EQ Cover

Plate

*120992001*

at 1-888-955-6000