manual

99-2001

A S

HUMMER • H2 2003-2004

1. Open center console and remove (4) 9/32” screws from console box and

remove box.

2. Remove (4) phillips screws from hinge on console door inside console

and remove door.

3. Loosen (1) T-15 torx on forward facing side of shift lever and pull up to

remove.

4. Unclip cup holder/shifter trim assembly and remove.

5. Remove (6) phillips screws from top of center console.

6. Remove (2) phillips screws from inside pocket on back of center console,

then unclip and remove. Continue to kit assembly.

Disconnect the negative battery terminal to prevent an accidental short circuit.

Continued on page 22.