manual

1. Locate the factory wiring harness in the dash. Metra recommends using the
proper mating adapter and making connections as shown. (Isolate and
individually tape off the ends of any unused wires to prevent electrical short
circuit.) See figure A
2. Re-connect the battery terminal and test the unit for proper operation.
3. Reassemble dash in the reverse order of your specific vehicle's Dash
Disassembly.
A) Strip wire ends back 1/2"
B) Twist ends together
C) Solder
D) Tape
99-2001
38
A LA
N
I
F
LBMESS
Y
ALL VEHICLES