User Manual

99-2020

1. Unclip the wood-grained trim ring from the factory cassette location.

2. Remove (4) 7/32” screws securing the cassette assembly and

disconnect the wiring.

Note: When using Metra’s 88-00-2020 radio replacement pocket, follow

Steps 3-5 to replace the radio:

3. Unclip the entire dash trim bezel and remove.

4. Remove (2) 9/32” fasteners from the right side of the factory radio module

and (2) fasteners from the left side.

5. Disconnect the wiring and remove the module.

Dash Disassembly

Factory Radio

Woodgrain