User Manual

99-2020

DIN head unit provision

1. Cut and remove the shaft supports from the Radio Housing.

2. Slide the DIN cage into the kit and secure by bending the metal locking

tabs down.

3. Slide the aftermarket head unit into the cage until secure. (Figure A)

4. Locate the factory wiring harness in the dash. Metra recommends using the

proper mating adapter from Metra or AXXESS. Re-connect the negative battery

terminal and test the unit for proper operation. (Figure B)

5. Reassemble dash in reverse order of disassembly. (Figure C)

Kit Assembly

(Figure C)

(Figure A)

(Figure B)