Quick Start Guide

REV. 4/1/2019 INST99-3028S
17
Radio legend
Radio legend
1. Eclipse (type 1)
2. Kenwood
3. Clarion (type 1)
4. Dual / Dual
5. JVC
6. Boss (type 1) /
Jensen / Pioneer
7. Alpine
8. Visteon
9. Valor
10. Clarion (type 2)
11. Boss (type 2)
12. Eclipse (type 2)
13. LG
14. Parrot
15. XITE
16. Philips
17. TBD
18. JBL
19. Insane Audio
20. Axxera / Magnadyne
21. Boss (type 3)
Continued on the next page
STEERING WHEEL CONTROL SETTINGS (CONT.)
Remapping the steering wheel control buttons
Once the Axxess interface has been programmed, the button assignment for the steering wheel
controls may be reassigned if so desired. For example, if the Seek Up button is preferred to be
the Mute button instead. Follow the steps below to remap the steering wheel control buttons :
1.
Ensure the Axxess interface is visible so you can see the L.E.D. flashes to confirm button recognition .
Tip: Turning the radio off is recommended.
2. Within the first twenty seconds of turning the ignition on, press and hold the Volume Up
button on the steering wheel until the L.E.D. goes solid.
3. Release the Volume Up button, the L.E.D. will then go out; The Volume Up button has now
been programmed.
4. Follow the list in the Button Function Legend to reference the order in which the steering
wheel control buttons need to be programmed.
Note: If the next function on the list is not on the steering wheel, press the Volume Up
button for (1) second until the L.E.D. comes on to skip that function, and then release the
Volume Up button. This will tell the Axxess interface that this function is not available, and it
will move on to the next function.
5. To complete the remapping process, press and hold the Volume Up button until the L.E.D. in
the Axxess interface goes out.
1. Volume-Up
2. Volume-Down
3. Seek-Up/Next
4. Seek-Down/Prev
5. Source/Mode
6. Mute
7. Preset-Up
8. Preset-Down
9. Power
10. Band
11. Play/Enter
12. PTT (Push to Talk)
13. On-Hook
14. Off-Hook
15. Fan-Up *
16. Fan-Down *
17. Temp-Up *
18. Temp-Down *
Button Function Legend
Note: Some radios may not have these commands. Please refer to the manual provided with the
radio, or contact the radio manufacturer for specific commands recognized by that particular radio.
* Not applicable in this application