INSTALLATION INSTRUCTIONS FOR PART 99-3300 APPLICATIONS GM MULTI KIT (see models list inside) 99-3300 KIT FEATURES • DIN Mount Radio Provisiion • Shaft Mount Radio Provisiion KIT COMPONENTS A) Radio Housing • Spacer A B TOOLS REQUIRED: Small Flat Blade Screwdriver/ Panel Removal Tool • Phillips Screwdriver • Cutting Tool • Socket Set 1-800-221-0932 www.metraonline.
99-3300 TABLE OF CONTENTS Dash Disassembly Chevrolet - Blazer 1998-2002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - Camaro 1997-2002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - Caprice 1994-1996 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - Cavalier 1995-1999 . . . . . . . . . . . . . . . . . . . . . . . .
99-3300 DASH DISASSEMBLY Chevrolet Blazer/S-10 Pickup, GMC Jimmy/Sonoma 1998-2002, GMC Envoy, Isuzu Hombre, Oldsmobile Bravada 1998-2001 5 Unclip and remove instrument cluster trim panel. 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 6 Remove (2) 9/32” hex head screws securing radio. Unplug and remove radio. 2 Remove (2) 9/32” hex head screws from the lower dash trim panel below steering column. Continue to kit assembly.
99-3300 DASH DISASSEMBLY Chevrolet Camaro 1997-2002 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the radio trim panel. (Figure A) B 3 Remove (2) 9/32” hex head screws securing radio. Unplug and remove radio. (Figure A) 4 Cut and remove the rear support from the back of radio cavity. (Figure B) Continue to kit assembly.
99-3300 DASH DISASSEMBLY Chevrolet Caprice, Impala 1994-1996 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 7 Unclip and remove instrument cluster trim panel. 8 Remove (1) 9/32” hex head screw from the left edge of dash trim panel. 2 Remove (5) 9/32” hex head screws from the ashtray cavity. 9 Unclip and remove dash trim panel. 3 Remove (4) 9/32” hex head screws from bottom edge of dash trim panel. 10 Remove (2) 9/32” hex head screws securing radio.
99-3300 DASH DISASSEMBLY Chevrolet Cavalier 1995-1999 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 7 Remove dash pad. 8 Remove (3) Phillips head screws from top edge of instrument cluster/radio trim panel. Unclip and remove dash trim panel. 2 Remove (3) 9/32” hex head screws from along top edge inside of glove box. 9 Remove (2) 9/32” hex head screws securing radio. Unplug and remove radio. 3 Remove (2) 9/32” hex head screws from behind glove box.
99-3300 DASH DISASSEMBLY Chevrolet Corvette 1997-1999 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 7 Remove ashtray and remove (1) screw from ashtray cavity. 8 Unclip and remove small grill to the left of the ignition switch. 2 Using a panel removal tool pry out on the “Ride Control” switch, unplug and remove switch. 9 Remove one (1) screw from behind grill. Unclip and remove dash trim panel. 3 Unclip and remove switch trim panel.
99-3300 DASH DISASSEMBLY Chevrolet Lumina/Monte Carlo 1995-2001 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove dash trim panel. (It may be necessary to loosen the lower dash trim panel below steering column.) A 3 Remove (2) 9/32” hex head screws securing radio. Unplug and remove radio. 4 Cut and remove the rear support from the back of radio cavity. (Figure A) Continue to kit assembly.
9-3300 DASH DISASSEMBLY Chevrolet Malibu 1997-2000 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the radio trim panel. 3 Remove (2) 9/32” hex head screws securing radio. Unplug and remove radio. Continue to kit assembly.
99-3300 DASH DISASSEMBLY Chevrolet Venture, Pontiac TransSport 19971999, Oldsmobile Silhouette 1997-2000, Pontiac Montana 1999 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 4 Unclip and remove the radio trim panel. 5 Remove (2) 9/32” hex head screws securing radio. Unplug and remove radio. 2 Remove ashtray and remove (1) Phillips head screw from ashtray cavity. 6 Cut and remove the rear support from the back of radio cavity.
99-3300 KIT ASSEMBLY DIN MOUNT RADIO PROVISION *Note: Refer also to the instructions included with the aftermarket radio. A 1 Cut and remove the shaft supports from the radio housing. (Figure A) 2 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs outward. (Figure B) NOTE: The spacer included with this kit can be used between the radio and the DIN cage fror vehicles with shallow radio cavities if necessary.
99-3300 KIT ASSEMBLY SHAFT MOUNT RADIO PROVISION *Note: Refer also to the instructions included with the aftermarket radio. 1 Slide the aftermarket radio into the radio housing from the back and secure using shaft nuts supplied with the radio. (Figure A) Continue to final assembly.
99-3300 FINAL ASSEMBLY FINAL ASSEMBLY A (A) Strip wire ends back 1/2" B B) Twist ends together C) Solder D) Tape C D 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative battery terminal and test the unit for proper operation.
99-3300 NOTES 12
99-3300 NOTES 13
99-3300 INSTRUCTIONS 1-800-221-0932 www.metraonline.com REV.