User Manual

ManualsBrandsMetra Manualschassis components99-3300

INSTALLATION INSTRUCTIONS FOR PART 99-3300

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 3/19/2013 INST99-3300

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Table of Contents

Dash Disassembly

– Chevrolet Blazer/S-10 Pickup, GMC

Jimmy/Sonoma 1998-2001 ..................................................2

– Chevrolet Caprice/Impala 1994-1996 ...................................2

– Chevrolet Camaro 1997-2002 .............................................. 2

– Chevrolet Cavalier 1995-1999 ...........................................2-3

– Chevrolet Corvette 1997-2004 .............................................3

– Chevrolet Lumina 1995-2001/Monte Carlo 1995-1999.........3

– Chevrolet Malibu 1997-2000 ................................................3

– Chevrolet Venture/Oldsmobile Silhouette 1997-1999, Pontiac

Trans Sport 1997-1998, Montana 1999 ................................4

Kit Assembly

– DIN head unit provision .........................................

(back page) 4

• DIN head unit provision

• Various mounting depth alternatives

• A) Radio housing • B) Spacer

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-1858 - GM harness 1987-2005

Antenna Adapter: • 40-GM10 - GM antenna adapter 1983-2013

• Phillips screwdriver • Utility knife • Socket wrench

TOOLS REQUIRED

Chevrolet/Pontiac 1993-2002

99-3300

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-3300 APPLICATIONS Chevrolet/Pontiac 1993-2002 99-3300 KIT FEATURES • DIN head unit provision • Various mounting depth alternatives KIT COMPONENTS • A) Radio housing • B) Spacer REV. 3/19/2013 INST99-3300 A Kit Assembly – DIN head unit provision .........................................
PAGE 2
Dash Disassembly 99-3300 Chevrolet Blazer/S-10 Pickup, GMC Jimmy/ Sonoma 1998-2001 1. Remove (2) 9/32” hex-head screws from the knee bolster. 2. Pull down on the bolster and remove 9/32” screws exposed on the base of the dash trim bezel. 3. Remove (1) Phillips screw above the instrument cluster. Unclip the dash trim bezel and remove. 4. Remove (2) 9/32” hex-head screws securing the factory head unit and disconnect the wiring. Continue to kit assembly Chevrolet Caprice/ Impala 1994-1996 1.
PAGE 3
Dash Disassembly 99-3300 Chevrolet Cavalier 1995-1999 Chevrolet Corvette 1997-2004 3. Remove (1) phillips screw exposed from each side. 1. Pry out on the ride control switch and disconnect the wiring. 2. Unsnap the switch trim and remove (2) 10mm hexhead bolts exposed. 3. Open the center console door, remove (4) screws from the inner hinge and remove the door. 4. Open the ashtray and remove (1) screw exposed. 5. Remove the ashtray and (1) screw exposed. 6.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 99-3300 Dash Disassembly Chevrolet Venture/ Oldsmobile Silhouette 1997-1999, Pontiac TransSport 1997-1998 Montana 1999 1. Remove the ashtray and (1) Phillips screw exposed in the ashtray cavity. 2. Remove (1) Phillips screw from the cigarette lighter compartment. 3. Remove (2) Phillips screws securing the factory head unit and disconnect the wiring. Continue to kit assembly Kit Assembly DIN head unit provision 1.