User Manual

ManualsBrandsMetra Manualschassis components99-3306

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 1/27/2013 INST99-3306

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 99-3306

• DIN radio provision with pocket

• ISO radio provision with pocket

• Double DIN radio provision

• A) Radio housing • B) ISO brackets • C) ISO Trim plate • D) Double DIN brackets

• E) Double DIN trim plate • F) Pocket

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness:

• 70-2105 - DAE/GM 2006-up

Antenna Adapter:

• 40-CR10 - Chrysler 2002-up into car

• Panel removal tool • Flat blade screwdriver

• Phillips screwdriver • Socket set

TOOLS REQUIRED

Chevrolet 2007-2011/Pontiac 2009-2010

99-3306

See application list inside

A B C

Summary of content (16 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-3306 APPLICATIONS See application list inside Chevrolet 2007-2011/Pontiac 2009-2010 99-3306 KIT FEATURES • DIN radio provision with pocket • ISO radio provision with pocket • Double DIN radio provision WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: • 70-2105 - DAE/GM 2006-up Antenna Adapter: • 40-CR10 - Chrysler 2002-up into car TOOLS REQUIRED • Panel removal tool • Flat blade screwdriver • Phillips screwdriver • Socket set REV.
PAGE 2
99-3306 Dash Disassembly 99-3306 Table of Contents All Vehicles Dash Disassembly 1. Unclip and remove the trim panel around radio. (Figure A) – Chevrolet Aveo (sedan) 2007-2008.......................................................................2 2. Remove (4) 9/32” screws securing the radio. Unplug and remove radio. (Figure B) – Chevrolet Aveo 2009-2011..................................................................................2 – Pontiac G3 2009-2010 .......................................
PAGE 3
Kit Assembly 99-3306 DIN radio provision with pocket 1. Slide the DIN cage into the radio housing and secure by bending the metal locking outward. (Figure A) 2 Slide the aftermarket radio into the DIN cage until it snaps into place. (Figure B) 3. Snap the pocket into the radio housing. (Figure C) 4. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
PAGE 4
Kit Assembly 99-3306 ISO radio provision with pocket 1. Mount the ISO brackets to the radio using the screws supplied with the radio. (Figure A) 2 Slide the radio into the radio opening until it snaps into place. (Figure B) 3. Snap the ISO Trim Plate onto the front of the radio housing. (Figure B) 4. Snap the pocket into the radio housing. (Figure C) (Figure A) (Figure C) 5. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS.
PAGE 5
99-3306 Double DIN radio provision 1. Cut and remove the center bar from the radio housing. (Figure A) 2 Snap the Double DIN brackets to the inside edge of the radio housing. (Figure B) 3. Slide the Double DIN radio into the bracket/radio housing assembly and secure the radio to the assembly using the screws supplied with the radio. (Figure C) 4. Snap the Double DIN trim-plate onto the front of the housing/radio assembly. (Figure C) (Figure A) (Figure C) 5. Locate the factory wiring harness in the dash.
PAGE 6
99-3306 Notes
PAGE 7
99-3306 Notes
PAGE 8
INSTALLATION INSTRUCTIONS FOR PART 99-3306 KNOWLEDGE IS POWER REV. 1/27/2013 INST99-3306 Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 9
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-3306 APLICACIONES Interior lista de aplicaciones Chevrolet 2007-2011/Pontiac 2009-2010 99-3306 CArACtEríStICAS dEL kIt • Provisión de radio DIN con bolsillo • Provisión de radio ISO con bolsillo • Provisión de radio doble DIN CABLEAdO Y CONEXIONES dE ANtENA (se venden por separado) Arnés de cableado: • 70-2105 - DAE/GM 2006 y mas Adaptador de antena: • 40-CR10 - Chrysler 2002 y mas (dentro de auto) tOOLS rEQUIrEd • Herramienta de remoción de panel • Destornil
PAGE 10
99-3306 Desmontaje del tablero 99-3306 Indice Todos los vehículos Desmontaje del tablero 1. Suelte y retire el panel de la moldura que rodea el radio. (Figura A) – Chevrolet Aveo (sedán) 2007-2008.......................................................................2 – Chevrolet Aveo 2009-2011..................................................................................2 2. Retire los (4) tornillos de 9/32” que sostienen el radio. Desconecte y retire el radio.
PAGE 11
Ensamble del kit 99-3306 Provisión de radio DIN con bolsillo 1. Deslice la reja DIN en la carcasa del radio y sujétela doblando hacia afuera las pestañas de metal. (Figura A) 2 Deslice el radio de mercado secundario en la reja DIN hasta que entre a presión. (Figura B) 3. Coloque a presión el bolsillo en la carcasa del radio. (Figura C) 4. Ubique el arnés del cableado de fábrica en el tablero. Metra recomienda usar el adaptador de acoplamiento adecuado de Metra o AXXESS.
PAGE 12
Ensamble del kit 99-3306 Provisión de radio ISO con bolsillo 1. Monte los soportes ISO en el radio con los tornillos incluidos con el radio. (Figura A) 2 Deslice el radio en la apertura correspondiente hasta que entre a presión. (Figura B) 3. Coloque a presión la placa de moldura ISO en la parte delantera de la carcasa del radio. (Figura B) 4. Coloque a presión el bolsillo en la carcasa del radio. (Figura C) (Figura A) (Figura C) 5. Ubique el arnés del cableado de fábrica en el tablero.
PAGE 13
99-3306 Provisión de radio doble DIN 1. Corte y retire la barra central de la carcasa del radio. (Figura A) 2 Coloque a presión los soportes doble DIN en el borde interior de la carcasa del radio. (Figura B) 3. Deslice el radio doble DIN en el ensamble de soporte/carcasa del radio y sujete el radio al ensamble con los tornillos suministrados con el radio. (Figura C) 4. Coloque a presión la placa de moldura doble DIN en la parte delantera del ensamble de la carcasa/radio.
PAGE 14
99-3306 Notas
PAGE 15
99-3306 Notas
PAGE 16
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-3306 EL CONOCIMIENTO ES PODER sus habilidades deIS instalación y KMejore NOWLEDGE POWER REV. 1/27/2013 INST99-3306 Enhance your installation and fabrication skills by fabricación inscribiéndose en la escuela de enrolling in the most recognized and respected dispositivos electrónicos móviles más reconocida mobile electronics school in our industry. y respetada de nuestra industria. en Log onto www.installerinstitute.