User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 99-3310B Installation Kit for 2013-Up Chevrolet Traverse/GMC Acadia/Buick Enclave

METRA. The World’s best kits.

™

metraonline.com

REV. 6/17/2016 INST99-3310B

Installation instructions for part 99-3310B

CAUTION!

All accessories, switches, climate controls panels, and

especially air bag indicator lights must be connected before cycling

the ignition. Also, do not remove the factory radio with the key in the

on position, or while the vehicle is running.

• ISO DIN radio provision with pocket

• Painted black

• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • See www.metraonline.com for harness information

Antenna Adapter: • 40-CR10

• Panel removal tool • Phillips screwdriver • 9/32” socket wrench

TOOLS REQUIRED

Chevrolet Traverse 2013-up /

GMC Acadia 2013-2016

Acadia Limited 2017

Buick Enclave 2013-up

99-3310B

Dash Disassembly ................................................. 2

Kit Assembly

– ISO DIN radio provision with pocket ...................... 3

Table of Contents

C D

Summary of content (8 pages)

PAGE 1
Installation instructions for part 99-3310B Chevrolet Traverse 2013-up / GMC Acadia 2013-2016 / Acadia Limited 2017 Buick Enclave 2013-up 99-3310B Table of Contents Dash Disassembly.................................................. 2 Kit Assembly –. ISO DIN radio provision with pocket....................... 3 KIT FEATURES • ISO DIN radio provision with pocket • Painted black KIT COMPONENTS • A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws REV.
PAGE 2
99-3310B Dash Disassembly 1. Unclip and remove the radio trim panel including the climate controls, then unplug the climate controls and remove the panel. (Figure A) 2. Remove (2) 9/32” Screws securing the hazard switch assembly. (Figure B) 3. Remove (4) 9/32” Screws securing the radio then unplug and remove the radio.
PAGE 3
99-3310B Kit Assembly ISO DIN radio provision with pocket 1. Slide the radio brackets into the radio trim panel aligning the holes in the trim panel to the clips on the brackets. (Figure A) 2. Mount the pocket to the radio brackets/trim panel assembly with the (4) #8 x 3/8” Phillips screws supplied. (Figure B) 3. Slide the radio into radio brackets/ trim panel assembly and secure with the screws supplied with the aftermarket radio. (Figure C) (Figure A) (Figure B) 4.
PAGE 4
Installation instructions for part 99-3310B IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling. KNOWLEDGE IS POWER REV.
PAGE 5
Instrucciones de instalación para la pieza 99-3310B Chevrolet Traverse 2013 y mas / GMC Acadia 2013-2016 / Acadia Limited 2017 Buick Enclave 2013 y mas 99-3310B Indice Desmontaje del tablero.......................................... 2 Ensamble del kit –. Provisión de radio ISO DIN con bolsillo..................
PAGE 6
99-3310B Desmontaje del tablero 1. Desenganche y quite el panel de la moldura del radio, incluyendo los controles del clima, luego desconecte los controles del clima y quite el panel. (Figura A) 2. Quite los (2) tornillos de 9/32” que sujetan el ensamble del interruptor de las luces intermitentes. (Figura B) 3. Quite los (4) tornillos de 9/32” que sujetan el radio y luego desconecte y quite el radio.
PAGE 7
99-3310B Ensamble del kit Provisión de radio ISO DIN con bolsillo 1. Deslice los soportes del radio en la placa de la moldura, alineando los orificios de la placa con los ganchos de los soportes. (Figura A) 2. Monte la cavidad en los soportes del radio/el ensamble de la placa de la moldura con los (4) tornillos Phillips #8 de 3/8” suministrados. (Figura B) 3.
PAGE 8
Instrucciones de instalación para la pieza 99-3310B IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente como se indica en las instrucciones. Por favor tenga el vehículo desarmado y listo para ejecutar los pasos de resolución de problemas antes de llamar.