Installation instructions

ManualsBrandsMetra ManualsMobile Phones99-3311B

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 4/7/2014 INST99-3311B

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Table of Contents

INSTALLATION INSTRUCTIONS FOR PART 99-3311B

• ISO DIN radio provision with pocket

• Double DIN radio provision

• Painted matte black

• A) Radio trim panel • B) Brackets • C) Pocket • D) (4) #8 x 3/8” truss-head Phillips screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-1858

Antenna Adapter: • 40-GM10

• Panel removal tool • Phillips screwdriver

• Socket Wrench

TOOLS REQUIRED

Chevrolet Camaro 1997-2002

99-3311B

B C D

Dash Disassembly

– Chevrolet Camaro 1997-2002 .............................. 2

Kit Assembly

– ISO DIN radio provision with pocket ...................2-3

– Double DIN radio provision ................................2-3

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-3311B APPLICATIONS Table of Contents Chevrolet Camaro 1997-2002 99-3311B Dash Disassembly – Chevrolet Camaro 1997-2002 .............................. 2 Kit Assembly – ISO DIN radio provision with pocket...................2-3 KIT FEATURES • ISO DIN radio provision with pocket • Double DIN radio provision • Painted matte black – Double DIN radio provision ................................
PAGE 2
99-3311B Dash Disassembly Kit Assembly Dash Disassembly 1. Screw the metal clips onto the radio trim panel. (Figure A) 1. Unsnap and remove radio panel. (Figure A) 2. Snap the factory vents into the radio trim panel. (Figure B) 2. Remove factory radio. Continued on next page 3. Remove climate vents and metal clips from factory panel.
PAGE 3
99-3311B Kit Assembly ISO DIN radio provision Double DIN radio provision 1. Mount the pocket to the radio brackets with the (4) #8 x 3/8” Phillips screws supplied. (Figure A) 1. Secure the radio to the radio brackets using the screws supplied with the radio. (Figure A) 2. Slide the radio into the bracket/ pocket assembly and secure with screws supplied with the radio. (Figure B) 2. Locate the factory wiring harness and antenna plug in the dash.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 99-3311B KNOWLEDGE IS POWER REV. 4/7/2014 INST99-3311B Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-3311B AplicAciones Indice Chevrolet Camaro 1997-2002 99-3311B Desmontaje del tablero – Chevrolet Camaro 1997-2002 .............................. 2 Ensamble del kit – Provisión de radio ISO DIN con cavidad ...............2-3 cArActerísticAs del kit • Provisión de radio ISO DIN con cavidad • Provisión de radio DDIN • Pintura negro mate – Provisión de radio DDIN......................................
PAGE 6
99-3311B Desmontaje del tablero Ensamble del kit Dash Disassembly 1. Atornille los ganchos metálicos al panel de la moldura del radio. (Figura A) 1. Suelte a presión y quite el panel del radio. (Figura A) 2. Coloque a presión las rejillas de fábrica en el panel de la moldura del radio. (Figura B) 2. Retire el radio de fábrica. 3. Retire las rejillas del clima y los ganchos metálicos del panel de fábrica.
PAGE 7
99-3311B Ensamble del kit Provisión de radio ISO DIN Provisiones de radio DDIN 1. Monte la cavidad en los soportes del radio con los (4) tornillos Phillips #8 de 3/8” suministrados. (Figura A) 1. Sujete el radio de mercado secundario a los soportes de radio con los tornillos suministrados con el radio. (Figura A) 2. Deslice el radio en el conjunto del soporte y sujétela con los tornillos suministrados con el radio. (Figura B) 2. Localice el arnés de cables de fábrica en el tablero.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-3311B EL CONOCIMIENTO ESOWER PODER K NOWLEDGE IS P Mejore sus habilidades de instalación y fabricación REV. 4/7/2014 INST99-3311B Enhance your installation and fabrication skills by enrolling in the en most recognized and respected inscribiéndose la escuela de dispositivos electrónicos mobile school in our industry. móvileselectronics más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.