User Manual

11
1. Usingapanelremovaltool,pryoutwardonthe
dashtrimbezelandremove.(FigureA)
2. Remove(2)screwssecuringthefactoryradioand
disconnectthewiring.
3. LocateBracket#7.(FigureB)
 Continue to kit assembly
Chevrolet Beretta/Corsica
1991-1996
Chevrolet S-10 Blazer/
S-10 Pickup 1998-2001,
GMC S-15 Jimmy/Sonoma
1998-2001, Isuzu Hombre
1998-2001
Chevrolet Blazer
(fullsize)
Suburban/GMC Jimmy (full
size) Suburban 1989-1991
1. Remove(2)screwsfromtheradiotrimbezeland
removethebezel.(FigureA)
2. Remove(2)screwssecuringthefactoryradioand
disconnectthewiring.
3. Removethehardwaresecuringthefactory
mountingbracketstothefactoryradio.
(FigureB)
4. Removeandretainthebrackets.
 Continue to kit assembly
1. Remove(2)9/32”hex-headscrewsfromtheknee
bolster.(FigureA)
2. Pulldownonthebolsterandremove9/32”screws
exposedonthebaseofthedashtrimbezel.
3. Remove(1)Phillipsscrewabovethe 
instrumentcluster.
4. Unclipthedashtrimbezelandremove.
5. Remove(2)9/32”hex-headscrewssecuringthe
factoryradioanddisconnectthewiring.
6. LocateBracketSet#10.(FigureB)
 Continue to kit assembly
(Figure A) (Figure B) (Figure A) (Figure B)
(S-10application
shownasexample)
(Figure A) (Figure B)
Dash Disassembly 99-4644