User Manual

23
1. Depressthecliplocatedbehindtheheadlight
knobandremovetheknob.
2. Remove(3)screwssecuringthesteeringcolumn
trimandremove.
3. Remove(4)screwsfromthebottomedgeofthe
dashtrimbezelandremove.(FigureA)
4. Removethehardwaresecuringthefactory
mountingbracketstothefactoryradio.
(FigureB)
5. Removeandretainthebrackets.
 Continue to kit assembly
Oldsmobile Toronado
1982-1985
Pontiac Bonneville
1987-1993
Pontiac 6000
1982-1991
1. Openthegloveboxandremove(1)screwfromthe
sideoftheradiotrimbezel.(FigureA)
2. Gentlyremovethebezelfromthedashandthe
dummyplatefromthebezel.
3. CutandremoveallmountingtabsonBracket#5
EXCEPTtabs“A”.(FigureA)
Note: Identify mounting tabs by the stamped letter
on the back of each tab.
 Continue to kit assembly
1. Gentlyunsnapandremovethedashtrimbezel.
(FigureA)
2. Removethescrewssecuringthefactoryradioand
disconnectthewiring.
3. Removethehardwaresecuringthefactory
mountingbracketstothefactoryradio.
(FigureB)
4. Removeandretainthebrackets.
 Continue to kit assembly
(Figure A) (Figure B)
(S-10application
shownasexample)
(Figure A) (Figure B) (Figure A) (Figure B)
(S-10application
shownasexample)
“A”
“A”
Dash Disassembly 99-4644