User Manual

24
1. Uncliptherightsideofthedashtrimbezel.
(FigureA)
2. Uncliptheleftsideofthebezelandremove.
(FigureA)
3. Remove(3)7mmhex-headscrewssecuringthe
factoryradioanddisconnectthewiring.
4. LocateBracketSet#9.(FigureB)
 Continue to kit assembly
Pontiac Bonneville
1994-1999
Pontiac Firebird
1993-2002
Pontiac Fiero 1984-1988
1. Remove(4)star-drivescrewsfromthedashtrim
bezel.(FigureA)
2. Gentlypulloutonthetrimbezelandremove.
3. Remove(4)hex-headscrewsfromthefactory
radioanddisconnectthewiring.
4.  Removethehardwaresecuringthefactory
mountingbracketstothefactoryradio.
(FigureB)
5. Removeandretainthebrackets.
 Continue to kit assembly
1. Uncliptheradiotrim
bezel.(FigureA)
2. Remove(4)
7mm hex-head
screwssecuringthe
factoryradioand
disconnectthewiring.
3. LocateBracketSet#9.
(FigureB)
 Continue to kit
assembly
(Figure A) (Figure B) (Figure A) (Figure B)
(S-10application
shownasexample)
(Figure A)
(Figure B)
Dash Disassembly 99-4644