User Manual

30
ISO radio provision
Kit Assembly 99-4644
(Figure B)(Figure A)
1. Chooseafaceplate(accordingtothedesiredinstallationdepth)andsnapitonto
thefrontoftheradiohousingandsecurewith(4)hex-headscrews.(FigureA)
2. SnaptheISOtrimringintothebackofthefaceplate.(FigureA)
3. Securemountingbracketstotheradiohousingwiththesuppliedcarriagebolts
andnuts.(FigureA)
4. ThenslidetheISObracketsontothetherearsupporttrayandsnapthetrayonto
thebackoftheradiohousing.(FigureA)
4. Slidetheradiointotheradioopening,aligningtheholesintheradiototheholes
intheISObrackets.Thensecuretheradiotothebracketswiththesuppled
screws.(FigureB)
5. Locatethefactorywiringharnessandantennapluginthedash.Metra
recommendsusingthepropermatingadapterfromMetraorAXXESS.Re-
connectthenegativebatteryterminalandtesttheradioforproperoperation.
6. Reassembledashinreverseorderofdisassemblyusingscrewspreviously
removed.(FigureB)