Owner's Manual
REV. 5/15/2019 INST99-5719
5
KIT ASSEMBLY
(Figure A)
(Figure B)
ISO DIN radio provision with pocket
1.
Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
2. Secure the ISO brackets to the radio
using the screws supplied with the
radio. (Figure A)
3. Slide the radio into the top opening of
the radio housing until the side clips
engage. (Figure B)
4. Snap the pocket into the bottom
opening of the radio housing. (Figure B)
5. Snap the trim plate into the radio
housing.
Continue to Audio Wiring