Owner's Manual

1.800.221.0932
|
MetraOnline.com
6
ISO DDIN radio provision
1. Cut and remove the center bar from the
radio housing. (Figure A)
2. Snap the ISO DDIN brackets to the inside
edge of the radio housing opening.
3. Slide the radio into the bracket/housing
assembly, then secure using the screws
supplied with the radio. (Figure B)
(Figure B)
4. Snap the ISO DDIN trim plate into the
radio housing. (Figure B)
Continue to Audio Wiring
KIT ASSEMBLY
(Figure B)
(Figure A)