INSTALLATION INSTRUCTIONS FOR PART 99-5815 APPLICATIONS FORD/LINCOLN/MERCURY (See specific model/year list inside) 99-5815 KIT FEATURES • DIN Radio Provision with Pocket • ISO Mount Radio Provision with Pocket • Double DIN Radio Provision • Stacked ISO Mount Units Provision KIT COMPONENTS A) Radio Housing (DIN and ISO DIN) • B) ISO Brackets • C) ISO Trim Plate • D) Side brackets • E) Radio Housing (Double DIN and Stacked ISO DIN) • F) Double DIN Brackets • G) (8) Spacers • H) (4) Screws D F E C B A
99-5815 TABLE OF CONTENTS Dash Disassembly Ford Edge 2007..............................................................................................................1 Ford F-150 2004-2006 / Expedition 2007 .....................................................................1 Lincoln Mark LT 2005-2007 ...........................................................................................1 Ford Mustang 2005-2007............................................................................................
99-5815 DASH DISASSEMBLY FORD F-150 2004-2007 LINC0LN MARK LT 2005-2006 FORD EXPEDITION 2007 FORD EDGE 2007-09 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A) 3 Remove (4) 9/32" screws to remove the factory radio. (Figure B) Continue to kit assembly.
99-5815 DASH DISASSEMBLY FORD MUSTANG 2005-2009 *Note: Refer also to the instructions included with the aftermarket radio. A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Remove the small rectangular shifter lever trim panel if equipped. (Figure A) 3 Remove (2) Phillips screws from under the center armrest at the back of the shifter trim panel (including cup holders). (Figure B) B 4 Unclip and remove panel.
99-5815 DASH DISASSEMBLY FORD FIVE-HUNDRED 2005-2007/FORD TAURUS 2008-09 MERCURY MONTEGO 2005-2007, MERCURY SABLE 2008-09 *Note: Refer also to the instructions included with the aftermarket radio. 1 Disconnect the negative battery terminal to prevent an accidental short circuit. A 2 Unclip and remove the small rectangular trim around shift lever. (Figure A) 3 Unclip and remove the entire panel (including cup holders) surrounding the shift lever.
99-5815 DASH DISASSEMBLY FORD FUSION 2006-2007 MERCURY MILAN 2006-2008 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A) 3 Remove (4) 9/32" screws to remove the factory radio. (Figure B) Continue to kit assembly.
99-5815 DASH DISASSEMBLY FORD FREESTYLE 2005-2007 FORD TAURUS X 2008-09 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove entire panel surrounding the radio and a/c controls. (Figure A) 3 Remove (4) 9/32” screws from radio to remove. (Figure B) Continue to kit assembly.
99-5815 DASH DISASSEMBLY FORD FREESTAR 2004-2007 MERCURY MONTEREY 2004-2007 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A) 3 Remove (4) 9/32" screws to remove the factory radio. (Figure B) Continue to kit assembly.
9-5815 DASH DISASSEMBLY FORD FOCUS 2005-2007 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A) 3 Remove (4) 9/32" screws to remove the factory radio. (Figure B) Continue to kit assembly.
99-5815 DASH DISASSEMBLY FORD EXPLORER/EXPLORER SPORT TRAC 2006-2009 MERCURY MOUNTAINEER 2006-2009 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Open center console and remove (2) Phillips screws then unclip and remove entire panel surrounding shifter. (Figure A) B C 3 Remove dash panel surrounding radio to access the factory radio screws. (Figure B) 4 Remove (4) 9/32" screws to remove the factory radio. (Figure B) Continue to kit assembly.
99-5815 DASH DISASSEMBLY FORD F SERIES SUPER DUTY 2005-2007 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A) A B 3 Remove (4) 9/32" screws to remove the factory radio. (Figure B) Continue to kit assembly.
99-5815 DASH DISASSEMBLY FORD SUPER DUTY 2008-09 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the power outlet panel and the blank panel on the left and right side of the radio trim panel. (Figure A) A 3 Remove the (2) 9/32” screws exposed behind the two panels remove in step 2. 4 Unclip and remove the entire radio trim panel including the a/c control and vents. 5 Remove (4) 9/32” screws securing the radio.
99-5815 DASH DISASSEMBLY LINCOLN NAVIGATOR 2007-09 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the panel surrounding the shifter. (Figure A) 3 Remove (2) 9/32” screws from the bottom of the radio/climate control trim panel. (Figure B) 4 Unclip and remove the entire panel surrounding the radio and including the climate controls. (Figure B) 5 Remove (4) 9/32” screws securing the radio. Unplug and remove the Radio. B Continue to kit assembly.
99-5815 DASH DISASSEMBLY LINCOLN MKX 2007-09 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Open center console lid and unclip and remove the center console trim panel surrounding the shifter. (Figure A) 3 Remove (2) Phillips screws from the storage bin then unclip and remove the bin. (Figure B) 4 Unclip and remove the upper and lower center trim panel as one assembly. (Figure C) B 5 Remove (4) 9/32” screws securing the radio. Unplug and remove the Radio.
99-5815 DASH DISASSEMBLY LINCOLN MKZ 2007-09/LINCOLN ZEPHYR 2006 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the top of the center console. (Figure A) 3 Open ashtray door and remove ashtray then remove (1) Phillips screw from inside ashtray cavity. Close ashtray door. B 4 Unclip and remove the climate control and trim panel assembly starting at the bottom edge. (Figure B) 5 Open the climate control vents and pull straight outward to remove.
99-5815 DASH DISASSEMBLY LINCOLN MKZ 2007-09/LINCOLN ZEPHYR 2006 D 6 Remove (2) 9/32” from the bottom of the radio trim panel assembly and (2) 9/32” screws from inside the vents. (Figure D) 7 Unclip the radio trim panel/radio assemmbly. Unplug and remove assembly. (Figure D) 8 Remove (4) 9/32” screws securing the radio to the trim panel and remove the radio. (Figure E) E Continue to kit assembly.
99-5815 KIT ASSEMBLY DIN RADIO PROVISION WITH POCKET NOTE: Refer also to the instructions included with the aftermarket radio. 1A 1 (a) For the Ford Edge/Expedition 2007, Explorer 2006-07, Fusion 2006-07, Mustang 2007 and the Super Duty 2008 attach the included spacers to the back of the radio housing mounting tabs. (Figure 1A) NOTE: Use the screws supplied with this kit to mount the radio housing in the vehicles that require the spacers.
99-5815 KIT ASSEMBLY ISO MOUNT RADIO PROVISION WITH POCKET NOTE: Refer also to the instructions included with the aftermarket radio. 1 (a) For the Ford Edge/Expedition 2007, Explorer 2006-07, Fusion 2006-07, Mustang 2007 and the Super Duty 2008 attach the included spacers to the back of the radio housing mounting tabs. (Figure 1A) NOTE: Use the screws supplied with this kit to mount the radio housing in the vehicles that require the spacers.
99-5815 KIT ASSEMBLY DOUBLE DIN RADIO PROVISION *Note: Refer also to the instructions included with the aftermarket radio. 1 For the 2007 Ford Edge/Expedition, 2006-07 Explorer/Fusion/Mercury Milan, 2004-07 F-150, 2005-07 Five Hundred/Freestyle/Mustang/ Mercury Montego, 2005-07 Lincoln Mark LT and the 2008 Super Duty, cut and remove the rear mounting tabs from the Double DIN Brackets a. If your vehicle is not listed above move to step 2.
99-5815 KIT ASSEMBLY STACKED ISO MOUNT UNITS PROVISION *Note: Refer also to the instructions included with the aftermarket radio. 1 For the 2007 Ford Edge/Expedition, 2006-07 Explorer/Fusion/ Mercury Milan, 2004-07 F-150, 2005-07 Five Hundred/ Freestyle/Mustang/Mercury Montego, 2005-07 Lincoln Mark LT and the 2008 Ford Super Duty, cut and remove the rear mounting tabs from the Double DIN Brackets. a. If your vehicle is not listed above move to step 2.
99-5815 FINAL ASSEMBLY FINAL ASSEMBLY A (A) Strip wire ends back 1/2" B B) Twist ends together C) Solder C D) Tape D 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative battery terminal and test the unit for proper operation. 3 Reassemble radio and dash assemblies in reverse order of disassembly.
99-5815 NOTES 20
INSTRUCCIONES DE INSTALACIÓ N PARA LA PIEZA 95-8202 APLICACIONES FORD/LI NCOLN/MERCU RY (see specific model/year list inside) 99-5815 CARACTERÍSTICAS DEL KIT • Accesorio para radio DIN con bolsillo • Accesorio para radio de montaje ISO con bolsillo • Accesorio para radio DIN doble • Accesorio para unidades de montaje ISO apiladas COMPONENTES DEL KIT A) Alojamiento del radio (DIN y DIN ISO) • B) Soportes ISO • C) Placa de terminación ISO • D) Soportes laterales • E) Alojamiento del radio (DIN doble y DIN
99-5815 INDICE Desmontaje del tablero Ford Edge 2007..............................................................................................................1 Ford F-150 2004-2006 / Expedition 2007 .....................................................................1 Lincoln Mark LT 2005-2007 ...........................................................................................1 Ford Mustang 2005-2007...............................................................................................
99-5815 DESMONTAJE DEL TABLERO FORD F-150 2004-2007 LINC0LN MARK LT 2005-2006 FORD EXPEDITION 2007 FORD EDGE 2007-09 A 1 Desconecte el terminal negativo de la batería, a fin de evitar un cortocircuito accidental. 2 Quite a presión y retire todo el panel que rodea el radio y los controles de clima. (Figura A) 3 Retire (4) tornillos de 9/32 in para retirar el radio de fábrica. (Figura B) Continúe con el montaje del kit.
99-5815 DESMONTAJE DEL TABLERO FORD MUSTANG 2005-2009 1 2 3 4 5 6 *Nota: Asimismo, remítase a las instrucciones incluidas con el radio de posventa. Desconecte el terminal negativo de la A batería, a fin de evitar un cortocircuito accidental. Retire el panel de terminación pequeño rectangular de la palanca de velocidades, si corresponde.
99-5815 DESMONTAJE DEL TABLERO FORD FIVE-HUNDRED 2005-2007/FORD TAURUS 2008-09 MERCURY MONTEGO 2005-2007, MERCURY SABLE 2008-09 *Nota: Asimismo, remítase a las instrucciones incluidas con el radio de posventa. 1 Desconecte el terminal negativo de la batería, a fin de evitar un cortocircuito accidental. 2 Desenganche y retire la terminación pequeña rectangular que rodea la palanca de velocidades.
99-5815 DESMONTAJE DEL TABLERO FORD FUSION 2006-2007 MERCURY MILAN 2006-2008 A 1 Desconecte el terminal negativo de la batería, a fin de evitar un cortocircuito accidental. 2 Quite a presión y retire todo el panel que rodea el radio y los controles de clima. (Figura A) 3 Retire (4) tornillos de 9/32 in para retirar el radio de fábrica.
99-5815 DESMONTAJE DEL TABLERO FORD FREESTYLE 2005-2007 FORD TAURUS X 2008-09 A 1 Desconecte el terminal negativo de la batería, a fin de evitar un cortocircuito accidental. 2 Desenganche y retire todo el panel que rodea el radio y los controles del aire acondicionado. (Figura A) 3 Retire (4) tornillos de 9/32 in del radio para retirarlo. (Figura B) Continúe con el montaje del kit.
99-5815 DESMONTAJE DEL TABLERO FORD FREESTAR 2004-2007 MERCURY MONTEREY 2004-2007 A 1 Desconecte el terminal negativo de la batería, a fin de evitar un cortocircuito accidental. 2 Quite a presión y retire todo el panel que rodea el radio y los controles de clima. (Figura A) 3 Retire (4) tornillos de 9/32 in para retirar el radio de fábrica. (Figura B) Continúe con el montaje del kit.
99-5815 DESMONTAJE DEL TABLERO FORD FOCUS 2005-2007 A 1 Desconecte el terminal negativo de la batería, a fin de evitar un cortocircuito accidental. 2 Quite a presión y retire todo el panel que rodea el radio y los controles de clima. (Figura A) 3 Retire (4) tornillos de 9/32 in para retirar el radio de fábrica. (Figura B) Continúe con el montaje del kit.
99-5815 DESMONTAJE DEL TABLERO FORD EXPLORER/EXPLORER SPORT TRAC 2006-2009 MERCURY MOUNTAINEER 2006-2009 A 1 Desconecte el terminal negativo de la batería, a fin de evitar un cortocircuito accidental. 2 Abra la consola central y retire (2) tornillos Phillips y, luego, desenganche y retire todo el panel que rodea la palanca de velocidades. (Figura A) B C 3 Retire el panel del tablero que rodea el radio para tener acceso a los tornillos del radio de fábrica.
99-5815 DESMONTAJE DEL TABLERO FORD F SERIES SUPER DUTY 2005-2007 1 Desconecte el terminal negativo de la batería, a fin de evitar un cortocircuito accidental. 2 Quite a presión y retire todo el panel que rodea el radio y los controles de clima. (Figura A) A B 3 Retire (4) tornillos de 9/32 in para retirar el radio de fábrica. (Figura B) Continúe con el montaje del kit.
99-5815 DESMONTAJE DEL TABLERO FORD SUPER DUTY 2008-09 1 Desconecte el terminal negativo de la batería, a fin de evitar un cortocircuito accidental. 2 Desenganche y retire el panel de salida de alimentación eléctrica y el panel en blanco en los lados izquierdo y derecho del panel de terminación del radio. (Figura A) A 3 Retire los (2) tornillos de 9/32 in expuestos detrás de los dos paneles que se retiraron en el paso 2.
99-5815 DESMONTAJE DEL TABLERO LINCOLN NAVIGATOR 2007-09 1 Desconecte el terminal negativo de la batería, a fin de evitar un cortocircuito accidental. A 2 Desenganche y retire el panel que rodea la palanca de velocidades. (Figura A) 3 Retire (2) tornillos de 9/32 in de la parte inferior del panel de terminación del radio/de control de clima. (Figura B) 4 Desenganche y retire todo el panel que rodea el radio y que incluye los controles de clima.
99-5815 DESMONTAJE DEL TABLERO LINCOLN MKX 2007-09 1 Desconecte el terminal negativo de la batería, a fin de evitar un cortocircuito accidental. A 2 Abra la tapa de la consola central, y desenganche y retire el panel de terminación de la consola central que rodea la palanca de velocidades. (Figura A) 3 Retire (2) tornillos Phillips del recipiente de almacenamiento y, luego, desenganche y retire el recipiente.
99-5815 DESMONTAJE DEL TABLERO LINCOLN MKZ 2007-09/LINCOLN ZEPHYR 2006 1 Desconecte el terminal negativo de la batería, a fin de evitar un cortocircuito accidental. A 2 Desenganche y retire la parte superior de la consola central. (Figura A) 3 Abra la puerta del cenicero y retírelo. Retire (1) tornillo Phillips del interior del hueco del cenicero. Cierre la puerta del cenicero. 4 Desenganche y retire el conjunto del control de clima y del panel de terminación comenzando por el borde inferior.
99-5815 DESMONTAJE DEL TABLERO LINCOLN MKZ 2007-09/LINCOLN ZEPHYR 2006 6 Retire (2) tornillos de 9/32 in de la parte inferior del conjunto del panel de terminación del radio y (2) tornillos de 9/32 in del interior de las rejillas de ventilación. (Figura D) D 7 Desenganche el conjunto del panel de terminación/radio. Desenchufe y retire el conjunto. (Figura D) 8 Retire (4) tornillos de 9/32 in que sujetan el radio al panel de terminación y retire el radio. (Figura E) Continúe con el montaje del kit.
99-5815 MONTAJE DEL KIT ACCESORIO PARA RADIO DIN CON BOLSILLO NOTA: Asimismo, remítase a las instrucciones incluidas con el radio de posventa. 1 ((a) Para los modelos Ford Edge 1A /Expedition 2007, Explorer 2006-07, Fusion 2006-07, Mustang 2007 y Super Duty 2008, coloque los espaciadores incluidos en la parte posterior de las lengüetas de montaje del alojamiento del radio.
99-5815 MONTAJE DEL KIT ACCESORIO PARA RADIO DE MONTAJE ISO CON BOLSILLO NOTA: Asimismo, remítase a las instrucciones incluidas con el radio de posventa. 1 (a) Para los modelos Ford 1A Edge/Expedition 2007, Explorer 2006-07, Fusion 2006-07, Mustang 2007 y Super Duty 2008, coloque los espaciadores incluidos en la parte posterior de las lengüetas de montaje del alojamiento del radio.
99-5815 MONTAJE DEL KIT ACCESORIO PARA RADIO DIN DOBLE *Nota: Asimismo, remítase a las instrucciones incluidas con el radio de posventa. 1 Para los modelos Ford Edge/Expedition 2007, Explorer/Fusion/Mercury Milan 2006-07, F-150 2004-07, Five Hundred/Freestyle/Mustang/Mercury Montego 2005-07, Lincoln Mark LT 200507 y Super Duty 2008, corte y retire las lengüetas de montaje traseras de los soportes DIN dobles a. Si su vehículo no se incluyó antes, continúe con el paso 2.
99-5815 MONTAJE DEL KIT ACCESORIO PARA UNIDADES DE MONTAJE ISO APILADAS *Note: Asimismo, remítase a las instrucciones incluidas con el radio de posventa. 1 Para los modelos Ford Edge/Expedition 2007, Explorer/Fusion/Mercury Milan 200607, F-150 2004-07, Five Hundred/Freestyle/Mustang/Mercury Montego 2005-07, Lincoln Mark LT 2005-07 y Ford Super Duty 2008, corte y retire las lengüetas de montaje traseras de los soportes DIN dobles. a. Si su vehículo no se incluyó antes, continúe con el paso 2.
99-5815 MONTAJE FINAL MONTAJE FINAL A A) Pele 1/2 in de los extremos de los cables. B B) Tuerza los extremos juntos. C) Suelde. C D) Encinte. D 1 Ubique el arnés del cableado de fábrica en el tablero. Metra recomienda usar el adaptador de acoplamiento adecuado y realizar las conexiones como se muestra. (Aísle y encinte individualmente los extremos de cualquier cable que no esté en uso, a fin de evitar un cortocircuito eléctrico).
99-5815 NOTAS 20