Installation instructions

ManualsBrandsMetra ManualsMobile Phones99-5830B

INSTALLATION INSTRUCTIONS FOR PART 99-5830B

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 8/16/2013 INST99-5830B

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Table of Contents

• ISO DIN radio provision with pocket

• Double DIN radio provision

• Painted Matte Black

• Integrated button and LCD climate control panel

• Integrated hazard button and passenger airbag light

• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws for pocket

• E) (4) #8 x 3/8” Phillips screws for OE display to housing

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • AX-ADBOX1 Interface • AX-ADBOX2 Interface • AX-ADFD02 Harness

Antenna Adapter: • 40-EU10 Multi-App Antenna Adapter

• Panel removal tool • Phillips screwdriver

• Socket Wrench • Torx screwdrivers

TOOLS REQUIRED

Ford F-150 2013-up

With factory 4.2 inch LCD screen

99-5830B

B C D E

Dash Disassembly

– Ford F-150 2013-up ............................................ 2

Kit Assembly

– ISO DIN radio provision with pocket ...................... 3

– Double DIN radio provision ................................... 3

– Color adjustment .................................................. 4

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-5830B APPLICATIONS Table of Contents Ford F-150 2013-up With factory 4.2 inch LCD screen Dash Disassembly 99-5830B – Ford F-150 2013-up ............................................ 2 Kit Assembly KIT FEATURES • ISO DIN radio provision with pocket • Double DIN radio provision • Painted Matte Black • Integrated button and LCD climate control panel • Integrated hazard button and passenger airbag light – ISO DIN radio provision with pocket......................
PAGE 2
99-5830 Dash Disassembly IMPORTANT NOTE: The factory radio must be powered off before starting disassembly. Omitting this step will disable the menu function. 3. Remove (4) 9/32” screws securing the radio/climate control panel to the dash. (Figure C) 4. Unclip and remove the factory radio/ climate control panel. (Figure C) 1. Open and lower the glove box. Remove three 8mm bolts, from inside the glove box facing up, holding passenger airbag assembly to dash and remove it. (Figure A) 2.
PAGE 3
99-5830 Kit Assembly ISO DIN radio provision Double DIN radio provision 1. Attach the factory display to the radio trim panel using the supplied (4) #8 x 3/8” Phillips screws. (Figure A) 1. Attach the factory display to the radio trim panel using the supplied (4) #8 x 3/8” Phillips screws. (Figure A) 2. Snap the factory traction control button into the Metra kit. 2. Snap the factory traction control button into the Metra kit. 3.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 99-5830B Installation Instructions Color Adjustment: 1. Press and hold the bottom left hot key for 5-seconds until the A/C icon begins to blink. 2. Press and hold the MAX button to increase Red. 3. Press and hold the A/C button to decrease Red. + - 4. Press and hold the Recirculation button to increase Green. 5. Press and hold the Mode button to decrease Green. 6. Press and hold the Rear Defrost button to increase Blue. 7.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-5830B APLICACIONES Indice Ford F-150 2013 y más recientes Con pantalla de fábrica LCD de 4.2 pulgadas Desmontaje del tablero 99-5830B – Ford F-150 2013 y más recientes ........................
PAGE 6
99-5830 Desmontaje del tablero NOTA IMPORTANTE: El radio de fábrica debe apagarse antes de iniciar el desensamble. Omitir este paso deshabilitará la función del menú. 1. Abra y baje la guantera. Quite los tres pernos de 8 mm del interior de la guantera orientados hacia arriba, sosteniendo el ensamble de la bolsa de aire del pasajero contra el tablero y quítelo. (Figura A) 2. Quite un tornillo de 7 mm del panel de la moldura a la derecha del radio, desenganche y quite.
PAGE 7
99-5830 Ensamble del kit Provisión de radio ISO DIN con bolsillo Provisión de radio doble DIN 1. Una la pantalla de fábrica al panel de la moldura del radio con los (4) tornillos Phillips suministrados #8 x 3/8”. (Figura A) 2. Coloque a presión el botón de control de tracción de fábrica en el kit de Metra. 3. Monte la bolsillo en los soportes del radio con los (4) tornillos Phillips de cabeza troncocónica #8 de 3/8” suministrados. (Figura B) 4.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-5830B Installation Instructions Ajuste del color: 1. Presione y mantenga presionada la tecla rápida izquierda de abajo durante 5 segundos hasta que el ícono del aire acondicionado empiece a parpadear. 2. Presione y mantenga presionado el botón MAX para aumentar el rojo. + - 3. Presione y mantenga presionado el botón del aire acondicionado para disminuir el rojo. 4. Presione y mantenga presionado el botón de recirculación para aumentar el verde. 5.