INSTALLATION INSTRUCTIONS FOR PART 99-6229 APPLICATIONS Chrysler Multi Kit Chrysler/Dodge/Eagle/Jeep/Plymouth 1974-2003 NOTE: It may be necessary to modify the back of the radio cavity in some cars to accommodate some deeper aftermarket radios. 99-6229 KIT FEATURES • DIN Mount Radio Provision KIT COMPONENTS A) Radio Housing A TOOLS REQUIRED: A) Phillips Screwdriver • B) Socket Set • C) Torx Driver • D) Panel Removal Tool or Flat Blade Screwdriver 1-800-221-0932 www.metraonline.
99-6229 TABLE OF CONTENTS CHRYSLER Dash Disassembly Concord 1993-97................................. 1 Cordoba 1975-78..................................1 Cordoba 1979-83..................................2 E-Class 1983-84...................................2 Fifth Avenue 1990-94...........................3 Imperial 1982-83..................................2 Imperial 1990-94..................................3 Laser 1984-89.......................................3 LeBaron 1976-81..............................
99-6229 TABLE OF CONTENTS Dash Disassembly DODGE (continued) Van (full size) 1978-97..........................13 Van (full size) 1998-2003......................14 024 1978-82...........................................10 400 1982-83............................................2 600 1983-87............................................2 EAGLE Vision 1993-97........................................1 JEEP Cherokee 1997-01.................................14 Grand Cherokee 1996-98......................
99-6229 DASH DISASSEMBLY CHRYSLER CONCORD / DODGE INTREPID 1993-97 EAGLE VISION 1993-97 / CHRYSLER LHS 1995-98 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the radio trim panel. 3 Remove the (2) 3/8” hex head screws securing the radio. 4 Unplug and remove the radio. 5 Continue to Kit Assembly.
99-6229 DASH DISASSEMBLY CHRYSLER CORDOBA 1979-83 / CHRYSLER IMPERIAL 1982-83 CHRYSLER NEWPORT / NEW YORKER 1980-81 DODGE MIRADA 1980-83 / DODGE ST. REGIS 1979-81 1 2 3 Disconnect the negative battery terminal to prevent an accidental short circuit. Remove (2) Phillips head screws from above the radio opening. Remove (2) Phillips head screws from above climate controls. 4 Unclip and remove radio trim panel. 5 Remove (2) 3/8” hex head screws securing the radio. 6 Unplug and remove radio.
99-6229 DASH DISASSEMBLY CHRYSLER FIFTH AVENUE / IMPERIAL 1990-94 CHRYSLER NEW YORKER 1988-95 DODGE DYNASTY 1988-93 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Remove (5) Phillips head screws from top edge of the dash trim panel. 3 Unclip and remove dash trim panel 4 Remove (2) 3/8” hex head screws securing the radio. 5 Unplug and remove the radio. 6 Continue to Kit Assembly.
99-6229 DASH DISASSEMBLY CHRYSLER LEBARON 1976-81 / DODGE DIPLOMAT 1976-89 DODGE ASPEN / PLYMOUTH VOLARE 1976-80 PLYMOUTH GRAN FURY 1975-85 1 2 Disconnect the negative battery terminal to prevent an accidental short circuit. Remove (4) Phillips head screws from top edge of the dash trim panel. 3 Remove (4) Phillips head screws from bottom edge of the dash trim panel. 4 Remove the dash trim panel. 5 Remove (2) 3/8” hex head screws securing the radio. 6 Unplug and remove the radio.
99-6229 DASH DISASSEMBLY CHRYSLER LEBARON GTS 1985-94 DODGE LANCER 1985-89 8 Disconnect the negative battery terminal to prevent an accidental short circuit. Remove (5) Torx head screws from the top edge of the dash trim panel. Remove (2) Torx head screws from below the radio. Remove (1) Torx head screw from above top left corner of radio. Remove (4) Torx head screws from lower left side of the dash trim panel. Unclip and remove the dash trim panel. Remove (2) 3/8” hex head screws securing the radio.
9-6229 DASH DISASSEMBLY CHRYSLER TOWN & COUNTRY 1993 DODGE CARAVAN / PLYMOUTH VOYAGER 1991-93 1 2 Disconnect the negative battery terminal to prevent an accidental short circuit. Remove the cigarette lighter. 3 Using a panel removal tool pry out and remove the radio trim panel. 4 Remove (2) 3/8” hex head screws securing the radio. 5 Unplug and remove the radio. 6 Continue to Kit Assembly.
99-6229 DASH DISASSEMBLY CHRYSLER TOWN & COUNTRY 1996-2000 PLYMOUTH VOYAGER / DODGE CARAVAN 1996-2000 1 2 3 4 5 6 Disconnect the negative battery terminal to prevent an accidental short circuit. Open the ashtray and remove the trim above the ashtray by unsnapping the trim. Remove (2) Phillips head screws from above ashtray. Remove (2) screws from above the radio. Unclip the radio trim panel and unplug the climate controls wires to remove the panel. Remove (2) 3/8” hex head screws securing the radio.
99-6229 DASH DISASSEMBLY DODGE DAKOTA 1987-96 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Remove (8) Torx head screws from the instrument trim panel. 3 Remove (2) Phillips head screws from lower steering column trim and remove trim. 4 Remove (1) Phillips head screw at each side of steering column 5 Unclip and remove instrument panel trim. 6 Remove (2) 3/8” hex head screws securing the radio. 7 Unplug and remove the radio. 8 Continue to Kit Assembly.
99-6229 DASH DISASSEMBLY DODGE DAYTONA 1990-93 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove radio trim panel. 3 Remove (1) screw from each side of center console. (This will allow easier access to the screws securing the radio.) 4 Remove (1) Phillips head screw at each of steering column 5 Unclip and remove instrument panel trim. 6 Remove (2) 3/8” hex head screws securing the radio. 7 Unplug and remove the radio.
99-6229 DASH DISASSEMBLY DODGE OMNI / 024 / RAMPAGE 1978-82 PLYMOUTH HORIZON / TC3 1978-82 PLYMOUTH SCAMP 1983-84 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Remove (7) Phillips head screws from the radio trim panel and remove the panel. Remove (2) 3/8” hex head screws securing the radio. 3 4 Unplug and remove the radio. 5 Continue to Kit Assembly.
99-6229 DASH DISASSEMBLY DODGE PICKUP / RAMCHARGER 1981-93 PLYMOUTH TRAILDUSTER 1981 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Remove (5) Phillips head screws from the edge of the dash trim panel. 3 Remove (1) Phillips head screw from above the radio opening. 4 Pry out the bottom edge of the dash trim panel and remove the panel. 5 Remove (2) 3/8” hex head screws securing the radio. 6 Unplug and remove the radio. 7 Continue to Kit Assembly.
99-6229 DASH DISASSEMBLY DODGE RAM 1998-2002 (DODGE RAM 2002 - 2500 & 3500 MODELS ONLY) 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Open door covering power outlet and remove (1) Phillips head screw. 3 Unclip and remove the dash trim panel. 4 Remove (2) 3/8” hex head screws securing the radio. 5 Unplug and remove the radio. 6 Continue to Kit Assembly.
99-6229 DASH DISASSEMBLY DODGE SPIRIT / PLYMOUTH ACCLAIM 1989-95 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the dash trim panel. 3 Remove the screws securing the side console trim pieces. 4 Move the side console trim pieces enough to gain access to the (2) screws securing the radio. 5 Remove (2) 3/8” hex head screws securing the radio. 6 Unplug and remove the radio. 7 Continue to Kit Assembly.
99-6229 DASH DISASSEMBLY DODGE FULL SIZE VAN 1998-2003 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the dash trim panel. 3 Remove (2) 3/8” hex head screws securing the radio. 4 Unplug and remove the radio. 5 Continue to Kit Assembly. JEEP CHEROKEE 1997-2001 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the dash trim panel 3 Remove (2) 3/8” hex head screws securing the radio.
99-6229 DASH DISASSEMBLY JEEP GRAND CHEROKEE 1996-98 1 2 3 Disconnect the negative battery terminal to prevent an accidental short circuit. Unsnap and remove climate control/wiper control trim panel. Remove (5) Phillips head screws from top edge of radio/instrument cluster trim panel. Remove (4) Phillips head screws from bottom edge of radio/instrument cluster trim panel. 4 Pry out the bottom edge of the radio/instrument cluster trim panel and remove panel.
99-6229 KIT ASSEMBLY DIN MOUNT PROVISION A 1 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure A) 2 Slide the aftermarket radio into the cage and secure. (Figure B) 3 Continue to Final Assembly.
99-6229 FINAL ASSEMBLY FINAL ASSEMBLY 1 Locate the factory wiring harness in the dash and make the connection as shown. Metra recomends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative battery terminal and test the unit for proper operation. 3 Reassemble radio and dash assemblies in reverse order of disassembly.
99-6229 NOTES 18
99-6229 NOTES 19
99-6229 NOTES 20
99-6229 INSTRUCTIONS 1-800-221-0932 REV. 06/19/06 www.metraonline.
