User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 99-6505 Chry/Dodge/Jeep 98-UP with Pocket Dash Kit

METRA. The World’s best kits.

™

metraonline.com

REV. 12/28/2015 INST99-6505

Installation instructions for part 99-6505

CAUTION!

Metra recommends disconnecting the negative bat

tery terminal before beginning any installation, unless the vehicle

manufacturer recommends against so. Please check with your local

Dealership for more information. All accessories, switches, climate

controls panels, and especially air bag indicator lights must be con

nected before reconnecting the battery or cycling the ignition. Also,

do not remove the factory radio with the key in the on position, or the

vehicle running. It would be best to remove the key from the ignition

and then wait a few seconds before removing the factory radio.

• DIN radio provision with pocket

• ISO DIN radio provision with pocket

• A) Radio housing • B) ISO trim plate • C) ISO snap-in brackets

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • Please visit metraonline.com for options

Antenna Adapter: • Please visit metraonline.com for options

• Torx T-20 driver • Phillips screwdriver • Socket wrench

TOOLS REQUIRED

Chrysler multi-kit 1998-2010

99-6505

A B C

See Table of Contents list inside cover

Table of Contents

APPLICATIONS

See application list inside cover

Summary of content (16 pages)

PAGE 1
Installation instructions for part 99-6505 Chrysler multi-kit 1998-2010 99-6505 KIT FEATURES • DIN radio provision with pocket • ISO DIN radio provision with pocket Table of Contents See Table of Contents list inside cover TOOLS REQUIRED • Torx T-20 driver • Phillips screwdriver • Socket wrench KIT COMPONENTS • A) Radio housing • B) ISO trim plate • C) ISO snap-in brackets REV.
PAGE 2
99-6505 Applications CHRYSLER 300M Concorde LHS PT Cruiser Sebring Town & Country Voyager 1999-2004 1998-2004 1999-2001 2001-2005 2001-2006 2000-2007 2001-2003 DODGE Caravan Dakota Durango Intrepid 2001-2007 2001-2004 2001-2003 1998-2004 Table of Contents DODGE (cont’d) Neon Ram Stratus Viper 2000-2006 2002-2005 2001-2006 2003-2010 JEEP Grand Cherokee Liberty Wrangler 1999-2004 2002-2007 2003-2006 PLYMOUTH Neon 2000-2001 Dash Disassembly –. Chrysler 300M 1999-2004/Concorde 1998-2004............
PAGE 3
99-6505 Dash Disassembly Chrysler PT Cruiser 2001-2005 Chrysler 300M 1999-2004 Concorde 1998-2004 / LHS 1999-2001 Dodge Intrepid 1998-2004 1. Unclip the power window control panel. Disconnect and remove the panel. 1. Remove the ashtray by pressing down on the inner spring clip. (Concorde only) 2. Pull off the climate control knobs. 3. Unclip and remove the dash trim panel. 2. Unclip the gear shifter trim panel and slide the trim panel toward the rear of the vehicle. 4.
PAGE 4
99-6505 Dash Disassembly Dodge Ram 2002-2005 Jeep Grand Cherokee 1999-2004 1. Unclip the top edge of the trim panel below the steering column. (It is not necessary to completely remove this panel). 1. Unclip and remove the radio trim panel. Chrysler Town & Country 2000-2007/ Voyager 2001-2003 Dodge Caravan 2001-2007 Dodge Neon 2000-2006 Plymouth Neon 2000-2001 1. Open the cup holder. Unclip and remove the trim above the cup holder. 2. Unclip and remove the ac / heater vents. 2.
PAGE 5
99-6505 Dash Disassembly Dodge Dakota 2001-2004 Durango 2001-2003 2 Screws 1. Remove (3) T-20 Torx screws from the bottom edge of the panel below the steering column and unsnap to remove the panel. 2. Remove (2) Phillips screws from the instrument cluster panel above the gauges. Jeep Liberty 2002-2007 Jeep Wrangler 2003-2006 1. Remove the ashtray and remove (1) Phillips screw exposed. 1. Unsnap and remove the defroster grille panel near the windshield. 2.
PAGE 6
99-6505 Dash Disassembly Dodge Viper 2003-2010 1. Using a panel removal tool, pry up on the center console trim panel. Be careful not to scratch the trim panel. (Figure A) 2. Loosen the shifter lock nut below the center console trim panel (Figure A), and unscrew the shifter knob. (Figure B) (Figure A) (Figure C) (Figure B) (Figure D) 3. Unplug the electrical connectors and remove the center console trim panel. (Figure C) 4.
PAGE 7
99-6505 Kit Assembly DIN radio provision with pocket ISO DIN radio provision with pocket 1. Remove the metal DIN sleeve from the aftermarket radio. 1. Remove the metal DIN sleeve and trim ring from the aftermarket radio. 2. Slide the sleeve into the assembly and secure by bending the metal locking tabs down. (Figure A) 2. Align the holes in the ISO snap-in brackets with the holes in the radio and mount the brackets to the radio with the screws supplied with the radio. (Figure A) 3.
PAGE 8
Installation instructions for part 99-6505 IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling. KNOWLEDGE IS POWER REV.
PAGE 9
Instrucciones de instalación para la pieza 99-6505 Chrysler multi-kit 1998-2010 99-6505 CARACTERÍSTICAS DEL KIT • Provisión de radio DIN con cavidad • Provisión de radio ISO DIN con cavidad Indice Ver interior de la portada para indice HERRAMIENTAS REQUERIDAS • Destornillador Torx T-20 • Destornillador Phillips • llave de tubo COMPONENTES DEL KIT • A) Carcasa del radio • B) Placa de moldura ISO • C) Soportes a presión ISO REV.
PAGE 10
99-6505 Aplicaciones CHRYSLER 300M Concorde LHS PT Cruiser Sebring Town & Country Voyager 1999-2004 1998-2004 1999-2001 2001-2005 2001-2006 2000-2007 2001-2003 DODGE Caravan Dakota Durango Intrepid 2001-2007 2001-2004 2001-2003 1998-2004 Indice DODGE (continuación) Neon Ram Stratus Viper 2000-2006 2002-2005 2001-2006 2003-2010 JEEP Grand Cherokee Liberty Wrangler 1999-2004 2002-2007 2003-2006 PLYMOUTH Neon 2000-2001 Desmontaje del tablero –. Chrysler 300M 1999-2004/Concorde 1998-2004...........
PAGE 11
99-6505 Desmontaje del tablero Chrysler PT Cruiser 2001-2005 Chrysler 300M 1999-2004 Concorde 1998-2004 / LHS 1999-2001 Dodge Intrepid 1998-2004 1. Desenganche el panel de control eléctrico de la ventana. Desconecte y quite el panel. 1. Retire el cenicero presionando hacia abajo el gancho de resorte interior. (solo Concorde) 2. Retire las perillas del control de clima. 3. Desenganche y quite panel de moldura de desmontaje. 2.
PAGE 12
99-6505 Desmontaje del tablero Chrysler Town & Country 2000-2007/ Voyager 2001-2003 Dodge Caravan 2001-2007 Dodge Neon 2000-2006 Plymouth Neon 2000-2001 Dodge Ram 2002-2005 Jeep Grand Cherokee 1999-2004 1. Desenganche el borde superior del panel 1. Desenganche y quite panel de moldura de radio. de ajuste por debajo de la columna de dirección. (No es necesario para eliminar completamente este panel). 1. Retire las perillas del control de clima. 1. Abra el portavasos.
PAGE 13
99-6505 Desmontaje del tablero Dodge Dakota 2001-2004 Durango 2001-2003 2 Screws 1. Retire los (3) tornillos Torx T-20 del borde inferior del panel, debajo de la columna de dirección y suelte a presión el panel para retirarlo. 2. Retire los (2) tornillos Phillips del panel del conjunto de instrumentos, arriba de los indicadores. Jeep Liberty 2002-2007 Jeep Wrangler 2003-2006 1. Retire el cenicero y retire el (1) tornillo Phillips expuesto. 1.
PAGE 14
99-6505 Desmontaje del tablero Dodge Viper 2003-2010 1. Con una herramienta de remoción de paneles, haga palanca para quitar el panel de la moldura de la consola central. Tenga cuidado de no rayar el panel de la moldura. (Figura A) 2. Afloje la tuerca de seguridad de la palanca de velocidades debajo del panel de la moldura de la consola central (Figura A), y desatornille la perilla de la palanca. (Figura B). (Figura A) (Figura C) (Figura B) (Figura D) 3.
PAGE 15
99-6505 Ensamble del kit Provisión de radio DIN con cavidad Provisión de radio ISO DIN con cavidad 1. Quite la manga de metal DIN del radio de mercado secundario. 1. Quite la manga de metal DIN y el anillo de moldura del radio de mercado secundario. 2. Deslice la manga al la ensamble y sujétela doblando hacia abajo las pestañas de metal. (Figura A) 2.
PAGE 16
Instrucciones de instalación para la pieza 99-6505 IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente como se indica en las instrucciones. Por favor tenga el vehículo desarmado y listo para ejecutar los pasos de resolución de problemas antes de llamar.