95-6511 or 99-6511 I N S TA L L AT I O N I N S T R U C T I O N S Chrysler Multikit 2007-up* *Visit MetraOnline.com for up-to-date vehicle specific applications.
APPLICATIONS Chrysler 200 ................................................2011-2014 300/300C ....................................2008-2010 Aspen . ....................................... 2008-2009 Sebring ....................................... 2007-2010 Town and Country.......................2008-2017 Dodge Avenger . .................................... 2008-2014 Caliber . ....................................... 2009-2012 Challenger .................................. 2008-2014 Charger .....................
DASH DISASSEMBLY Chrysler Aspen 2008-2009 Dodge Durango 2008-2009 1. Unsnap and remove storage cup holder assembly. (Figure A) 2. Remove (2) screws from bottom edge of center dash trim panel. Unsnap and remove the panel. (Figure B) 3. Remove (4) screws securing the radio. Unplug and remove radio. (Figure C) 9 12 Chrysler Sebring 2007-2010 POWER OUTLET 3 6 1. Unclip entire panel surrounding radio including A/C vents and clock. Unplug and remove panel. (Figure A) 2.
DASH DISASSEMBLY Chrysler Town & Country 2008-2010 Dodge Grand Caravan 2008-2010 1. Remove (2) screw covers facing up above radio then remove the (2) Phillips screws exposed. (Figure A) 2. Lift up on panel above radio then remove (2) Phillips screws exposed at front edge of radio trim panel. (Figure B) (Figure A) 4. Remove (2) Phillips screws exposed at bottom edge radio trim panel. (Figure D) 5. Unclip and remove entire panel surrounding radio including climate controls, vents and clock.
DASH DISASSEMBLY Chrysler Town & Country 2011-2017 Dodge Grand Caravan 2011-up Volkswagen Routan 2009-2013 Chrysler 200 2011-2014 1. Unclip and remove the radio trim panel. 2. Remove (4) Torx securing the radio. (Figure B) 1. Unclip and remove the radio trim panel. (Figure A) (Figure A) 2. Remove (4) Torx securing the radio. (Figure B) Continue to Kit Assembly Continue to Kit Assembly (Figure A) (Figure A) (Figure B) (Figure B) REV.
DASH DISASSEMBLY Chrysler 300/300C 2008-2010 Dodge Magnum/Charger 2008-2010 Dodge Avenger 2008-2014 1. Unclip and remove the center console trim panel. (Figure A) 1. Unsnap and remove center dash trim panel. (Figure A) 2. Remove (4) screws securing the radio. Disconnect and remove the radio. (Figure B) 1 3 2 5 4 6 2. Unclip the center dash trim panel. (Figure B) 3. Remove (4) screws securing the radio. Disconnect and remove the radio. (Figure C) Continue to Kit Assembly (Figure B) 4.
DASH DISASSEMBLY Dodge Dakota 2008-2011 Dodge Nitro 2007-2011 Jeep Liberty 2008-2012 1. Unclip and remove the trim panel surrounding the radio. (Figure A) 1. Unclip entire panel surrounding radio and climate controls, including A/C vents. Unplug and remove panel. (Figure A) 2. Remove (4) 7mm screws securing radio. Unplug and remove radio. (Figure B) 2. Remove (4) Phillips screws securing the radio.
DASH DISASSEMBLY Dodge Journey 2009-2010 (modifications to radio cavity required) 1. Unclip and remove the entire factory radio trim panel including the A/C controls. (Figure A) Tip: Open the compartment door at the top of the radio trim panel. 2. Remove (4) 7mm screws securing radio to dash to remove. (Figure B) Note: The top of the metal bracket in the sub dash will need to be cut to allow for the clearance of the Double DIN radio’s chassis.
(Figure B) (Figure D) N (Figure A) D 12V DC 4. Push down on the collar below the shifter then pull the shifter straight up to remove. (Figure D) 5. Unclip and remove the top of the center console including the cup holders. (Figure E) 6. Unclip and remove the trim panel from the accessory socket on the radio trim panel, then remove (1) T-25 Torx screw.
DASH DISASSEMBLY Dodge Ram 1500 2009-2011 Dodge Ram 2500/3500 2010-2011 Dodge Ram Chassis Cab 2011 Ram 1500/2500/3500 2012 Ram Chassis Cab 3500/4500/5500 2012 (continued) 7. Remove (2) T25 Torx screws from the top of the radio trim panel. (Figure G) 8. Unclip and remove the entire radio trim panel including the climate controls. (Figure H) 9. Remove (4) 9/32” screws securing the radio. (Figure I) Ram C/V Tradesman 2012-2015 1. Remove the radio trim bezel. (Figure A) 2.
DASH DISASSEMBLY Jeep Commander/Grand Cherokee 2008-2010 1. Unsnap and remove the small trim around the console shifter. (Figure A) 2. Unsnap and remove the larger trim around the console shifter. (Figure B) 3. Remove (1) Phillips screw from inside the small storage pocket in the lower dash, between the power outlets. (Figure C) 4. Unsnap and remove the dash panel from around the radio (including climate controls). (Figure D) 5. Remove (4) Phillips screws securing the radio. Unplug and remove radio.
DASH DISASSEMBLY Jeep Wrangler 2007-2010 (modifications to radio cavity required) 1. Unclip and remove the lower center trim below A/C controls. (Figure A) 2. Remove (2) Phillips screws exposed behind lower center panel. (Figure A) 3. Unclip and remove the upper center trim starting towards the rear of the panel. (Figure A) 4. Remove (2) Phillips screws exposed behind upper center panel. (Figure A) 5. Unclip and remove entire panel surrounding radio and climate controls, including A/C vents. 6.
DASH DISASSEMBLY Jeep Wrangler 2011-up (continued) (modifications to radio cavity required) 4. Remove pad in pocket on top center of dash then remove (1) 9/32” screw underneath. Remove dash panel from around radio and instrument cluster. (Figure D) 5. Remove (4) 9/32” screws securing the radio. Unplug and remove radio. 6. Remove (2) 9/32” screws securing the metal bracket inside of the dash cavity and remove it for depth. (Figure E) 7.
KIT ASSEMBLY DIN radio provision with pocket ISO DIN radio provision with pocket 1. Remove the metal DIN sleeve from the aftermarket radio. 1. Remove the metal DIN sleeve and trim ring from the aftermarket radio. 2. Slide the sleeve into the radio housing with pocket and secure by bending the metal locking tabs outward. (Figure A) 2. Secure the ISO brackets to the radio using the screws supplied with the radio. (Figure A) 3. Slide the radio into the sleeve until it clicks in. (Figure B) 3.
KIT ASSEMBLY ISO DDIN radio provision 1. Depending on the style of radio to be installed, secure either the “A” “Long nose” (wide) DDIN trim panels, or “B” “Short nose” (narrow) DDIN trim panels, to the ISO DDIN radio brackets using (4) #8 x 1/4” Phillips screws provided. (Figure A) Note: The trim panels are stamped on the back indicating the top and which style of radio the trim panel should be used for. “A” for long nose radios, “B” for short nose radios.
95-6511 or 99-6511 I N S TA L L AT I O N I N S T R U C T I O N S IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.
95-6511 or 99-6511 I N S T R U C C I O N E S D E I N S TA L AC I Ó N Chrysler Multikit 2007 y mas* * Visite MetraOnline.com para las aplicaciones específicas del vehículo hasta la fecha.
APLICACIONES Chrysler 200 ................................................2011-2014 300/300C ....................................2008-2010 Aspen . ....................................... 2008-2009 Sebring ....................................... 2007-2010 Town and Country.......................2008-2017 Dodge Avenger . .................................... 2008-2014 Caliber . ....................................... 2009-2012 Challenger .................................. 2008-2014 Charger .....................
DESMONTAJE DEL TABLERO Chrysler Aspen 2008-2009 Dodge Durango 2008-2009 1. Suelte a presión y retire el ensamble de almacenamiento/portavasos. (Figura A) 2. Retire los (2) tornillos del borde inferior del panel de la moldura del tablero central. Suelte y retire el panel. (Figura B) 3. Retire los (4) tornillos que sostienen el radio. Desconecte y retire el radio. (Figura C) 9 12 Chrysler Sebring 2007-2010 1.
DESMONTAJE DEL TABLERO Chrysler Town & Country 2008-2010 Dodge Grand Caravan 2008-2010 1. Retire las (2) tapas de los tornillos orientadas hacia arriba sobre el radio, luego retire los (2) tornillos Phillips expuestos. (Figura A) 2. Levante el panel de arriba del radio y luego retire los (2) tornillos Phillips expuestos en el borde frontal del panel de la moldura del radio. (Figura B) 3.
DESMONTAJE DEL TABLERO Chrysler Town & Country 2011-2017 Dodge Grand Caravan 2011 y mas Volkswagen Routan 2009-2013 Chrysler 200 2011-2014 1. Desenganche y retire el panel de 2. Retire los (4) tornillos Torx que sostienen el radio. (Figura B) 1. Desenganche y retire el panel de moldura para radio. (Figura A) moldura para radio. (Figura A) 2. Retire los (4) tornillos Torx que sostienen el radio.
DESMONTAJE DEL TABLERO Chrysler 300/300C 2008-2010 Dodge Magnum 2008-2009 Dodge Charger 2008-2010 1. Suelte a presión y retire el panel de la moldura del tablero central. (Figura A) 2. Retire los (4) tornillos que sostienen el radio. Desconecte y retire el radio. (Figura B) Continuará al ensamble del kit 1 3 2 5 4 6 (Figura A) Dodge Avenger 2008-2014 1. Desenganche y retire el panel de la moldura de la consola central. (Figura A) 2. Desenganche el panel de la moldura del tablero central.
DESMONTAJE DEL TABLERO Dodge Dakota 2008-2011 Dodge Nitro 2007-2011 Jeep Liberty 2008-2012 1. Desenganche y retire el panel de moldura que rodea el radio. (Figura A) 1. Desenganche todo el panel que rodea el radio y los controles del clima, incluyendo las rejillas del aire acondicionado. Desconecte y retire el panel. (Figura A) 2. Retire los (4) tornillos Phillips que sostienen el radio. (Figura B) Continuará al ensamble del kit 1 2 3 5 4 6 2.
DESMONTAJE DEL TABLERO Dodge Journey 2009-2010 (modificaciones a la cavidad de radio requerido) 1. Desenganche y retire todo el panel de la moldura del radio de fábrica, incluyendo los controles del aire acondicionado. (Figura A) Sugerencia: Abra la puerta del compartimiento de la parte superior del panel de la moldura del radio. 2. Retire los (4) tornillos de 7mm que sujetan el radio al tablero y retire.
(Figura B) (Figura D) N (Figura A) D 12V DC 4. Empuje hacia abajo el collar debajo de la palanca de velocidades, luego jale la palanca en línea recta hacia arriba para retirarla. (Figura D) 5. Desenganche y retire la parte superior de la consola central, incluyendo los portavasos. (Figura E) 6. Desenganche y retire el panel de la moldura del receptáculo de accesorios en el panel de la moldura del radio, luego retire (1) tornillo Torx T25.
DESMONTAJE DEL TABLERO Dodge Ram 1500 2009-2011 Dodge Ram 2500/3500 2010-2011 Dodge Ram Chassis Cab 2011 Ram 1500/2500/3500 2012 Ram Chassis Cab 3500/4500/5500 2012 (cont.) 7. Retire los (2) tornillos Torx T25 de la parte superior del panel de la moldura del tablero. (Figura G) 8. Desenganche y retire todo el panel de la moldura del radio, incluyendo los controles del clima. (Figura H) 9. Retire los (4) tornillos de 9/32” que sostienen el radio.
DESMONTAJE DEL TABLERO Jeep Commander/Grand Cherokee 2008-2010 1. Suelte a presión y retire la moldura pequeña de alrededor de la palanca de velocidades de la consola. (Figura A) 2. Suelte a presión y retire la moldura más grande alrededor de la palanca de velocidades de la consola. (Figura B) (Figura A) 3. Retire (1) tornillo Phillips del interior de la pequeña cavidad de almacenamiento del tablero inferior, entre los tomacorrientes. (Figura C) 4.
DESMONTAJE DEL TABLERO Jeep Wrangler 2007-2010 (modificaciones a la cavidad de radio requerido) 1. Desenganche y retire la moldura central inferior debajo de los controles del aire acondicionado. (Figura A) 2. Retire los (2) tornillos Phillips expuestos detrás del panel central inferior. (Figura A) 3. Desenganche y retire la moldura central superior, empezando hacia la parte trasera del panel. (Figura A) 4. Retire los (2) tornillos Phillips expuestos detrás del panel central superior. (Figura A) 5.
DESMONTAJE DEL TABLERO Jeep Wrangler 2011 y mas (cont.) (modificaciones a la cavidad de radio requerido) 4. Quitar el disco en el bolsillo en la parte superior centro del tablero retire (1) 9/32 “por debajo de los tornillos. Retire tablero de instrumentos de todo radio y cuadro de instrumentos. (Figura D) 5. Retire (4) 9/32 “tornillos que sujetan el radio. Desenchufe y quite la radio. 6.
ENSAMBLE DEL KIT Provisión de radio DIN con bolsillo Provisión de radio ISO DIN con bolsillo 1. Quite la manga de metal DIN del radio de mercado secundario. 1. Quite la manga de metal DIN del radio de mercado secundario. 2. Deslice la manga en el alojamiento del radio con cavidad y sujétela doblando las lengüetas de cierre de metal hacia afuera. (Figura A) 2. Fijar los soportes ISO en el radio utilizando los tornillos suministrados con el radio. (Figura A) 3.
ENSAMBLE DEL KIT Provisión de radio ISO DDIN 1. Dependiendo del estilo de la radio que se instalará, asegure los paneles de guarnición DDIN “A” de “nariz larga” (ancha), o los paneles de guarnición DDIN “B” de nariz corta (angosta), a los soportes de radio ISO DDIN usando ( 4) tornillos Phillips # 8 x 1/4 “provistos. (Figura A) Nota: Los paneles de moldura están estampados en la parte posterior, indicando la parte superior y el estilo de la radio para el que se debe usar el panel de moldura.
95-6511 or 99-6511 I N S T R U C C I O N E S D E I N S TA L AC I Ó N IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente como se indica en las instrucciones. Por favor tenga el vehículo desarmado y listo para ejecutar los pasos de resolución de problemas antes de llamar.