Owner's Manual

1.800.221.0932
|
MetraOnline.com
10
VIDEO OPTION SCREEN
1. Once in the setting screen, scroll down
to the Customize button. Pressing the
button will take you to the video option
screen. (Figure A)
2. From here select Video 2, then select an
option for the video input: AUX Video,
Backup Camera, Not Used. (Figure B)
3. After you have made your selection, tap
the “Done” button located on the upper
left hand corner of the screen to exit.
4. The About button will display the
current software of the kit, and also the
VIN of the vehicle.
Note: The Backup camera input is controlled
by data and will activate when you put the
vehicle in reverse.
Note: AUX video is controlled by data and
will only work while the vehicle is in park.
(Figure A) (Figure C)
(Figure B) (Figure D)