User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 99-7341B Hyundai Tucson 2010-up Installation Dash Kit for Single or Double DIN/ISO Radios, Black

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 2/13/2015 INST99-7341B

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Installation instructions for part 99-7341B

• ISO DIN Head Unit Provision With Pocket

• DDIN Head Unit Provision

• Painted Matte Black to match factory dash

• A) Radio trim panel • B) Radio Brackets • C) Pocket • D) (4) 3/8” Phillips Head Screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7304 • HYBL-03 (for models with NAV) • HYBL-04

• 40-KI11 (for models with NAV)

Antenna Adapter: • Not required

• Panel removal tool • Phillips screwdriver • Socket Wrench

TOOLS REQUIRED

HYUNDAI TUCSON

(without 4.3” screen) 2010-UP

99-7341B

Dash Disassembly

– Tucson (without 4.3” screen) 2010-up ........... 2

Kit Assembly

– ISO DIN radio provision with pocket ...................... 3

– Double DIN radio provision ................................... 3

Table of Contents

A B C D

Summary of content (8 pages)

PAGE 1
Installation instructions for part 99-7341B HYUNDAI TUCSON (without 4.3” screen) 2010-UP 99-7341B Table of Contents Dash Disassembly –.Tucson (without 4.3” screen) 2010-up. .......... 2 Kit Assembly –. ISO DIN radio provision with pocket....................... 3 KIT FEATURES • ISO DIN Head Unit Provision With Pocket • DDIN Head Unit Provision • Painted Matte Black to match factory dash –. Double DIN radio provision....................................
PAGE 2
99-7341B Dash Disassembly 1. Unclip and remove the trim panel above the radio. (Figure. A) 2. Unclip and remove the hazard switch panel. (Figure. B) 3. Remove (4) Phillips screws securing the radio. (Figure.
PAGE 3
99-7341B Kit Assembly ISO DIN radio provision with pocket Double DIN radio provision 1. Remove the metal “DIN” sleeve and plastic trim ring from the aftermarket radio. 1. Mount the radio to the Radio Brackets with screws supplied with the radio. (Figure. A) 2. Secure the pocket to the Radio Brackets using the supplied (4) screws. (Figure. A) 2. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS.
PAGE 4
Installation instructions for part 99-7341B KNOWLEDGE IS POWER REV. 2/13/2015 INST99-7341B Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 5
Instrucciones para la instalación de parte 99-7341B HYUNDAI TUCSON (sin pantalla de 4.3”) 2010 y mas 99-7341B CARACTERÍSTICAS DEL KIT • Accesorio para unidades centrales DIN ISO con bolsillo • Accesorio para unidades centrales DDIN • Pintado de color negro mate para que coincida con el tablero de fábrica Tabla de Contenido Desmontaje del Tablero –.Tucson (sin pantalla de 4.3”) 2010 y mas...... 2 Montaje del Kit –. Provisión de radio ISO DIN con bolsillo.................. 3 –.
PAGE 6
99-7341B Desmontaje del Tablero 1. Suelte y retire el panel de ajuste por encima de la radio. (Figura. A) 2. Suelte y retire el panel de interruptor de peligro. (Figura. B) 3. Retire (4) tornillos Phillips asegurar la radio. (Figura.
PAGE 7
99-7341B Montaje del Kit Provisión de radio ISO DIN con bolsillo Doble provisión de radio DIN 1. Retire el metal de la manga “DIN“ y anillo embellecedor de plástico de la radio no original. 1. Monte la radio a los soportes de radio con los tornillos suministrados con la radio. (Figura. A) 2. Asegure el bolsillo a los soportes de radio utilizando los (4) tornillos suministrados. (Figura. A) 2. Localice el arnés de cableado de fábrica en el tablero.
PAGE 8
Instrucciones para la instalación de parte 99-7341B EL CONOCIMIENTO ESOWER PODER K NOWLEDGE IS P Mejore sus habilidades de instalación y fabricación REV. 2/13/2015 INST99-7341B Enhance your installation and fabrication skills by enrolling in the en most recognized and respected inscribiéndose la escuela de dispositivos electrónicos mobile school in our industry. móvileselectronics más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.