User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 99-7342 Single/Double DIN Dash Installation Kit for 2011 Hyundai Sonata Vehicles

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 9/29/2014 INST99-7342

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Installation Instructions for 99-7342

• A) Radio housing • B) (2) A/C Vent trim panels • C) Double DIN brackets • D) Pocket

• E) Air bag light blank plate • F) Thermister mount • G) Hazard switch blank plate • H) (13) 1/2” Phillips screws

• I) (2) #8 x 3/8” Pan head screws • J) (4) #8 x 3/8” Truss head screws

KIT COMPONENTS

• ISO DIN radio provision with pocket

• Double DIN radio provision

• Painted black and silver to match factory dash

KIT FEATURES

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness:

• 70-7304 - Kia Hyundai 2010-up

• HYBL-01 - Hyundai Bluelink non-amp interface

• HYBL-04 - HYU/KIA amp/Bluelink interface

Antenna Adapter:

• Not required

• Panel removal tool • Phillips screwdriver

• Socket wrench

TOOLS REQUIRED

A C

I JHG

B D E F

Hyundai Sonata GLS/SE (without NAV) 2 011,

Sonata

(without NAV) 2012-2014

99-7342

Summary of content (16 pages)

PAGE 1
Installation Instructions for 99-7342 APPLICATIONS Hyundai Sonata GLS/SE (without NAV) 2011, Sonata (without NAV) 2012-2014 99-7342 WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: • 70-7304 - Kia Hyundai 2010-up • HYBL-01 - Hyundai Bluelink non-amp interface • HYBL-04 - HYU/KIA amp/Bluelink interface Antenna Adapter: • Not required REV.
PAGE 2
99-7342 Table of Contents Dash Disassembly – Hyundai Sonata GLS 2011................................. 2-3 – Hyundai Sonata SE 2011 (without NAV) ............... 2-3 – Hyundai Sonata 2012-2014 (without NAV) ........... 2-3 Kit Assembly Dash Disassembly 1. Unclip and remove the 2 trim panels surrounding the shifter and pocket. (Figure A) 4. Remove (4) Phillips screws securing the radio. (Figure D) 2. Remove (2) Phillips screws at the bottom left and right side of the radio trim panel. (Figure B) 5.
PAGE 3
99-7342 Dash Disassembly 6. 2014 with auto climate controls – Remove two screws and remove the factory thermistor, and set it aside to be mounted to the new kit. 7. Remove (2) Phillips screws securing the climate control to the radio panel. (Figure E) (Figure C) 8. Remove (4) Phillips screws securing the clock display. (Figure E) 9. Remove the four screws securing the vents to the radio panel and unclip them.
PAGE 4
Kit Assembly 99-7342 Kit Preparation 1. Snap the A/C vents into the A/C vent trim panels. (Figure A) 2. Attach the left and right A/C vent trim panels and the climate controls to the main radio housing panel using the provided (10) #8x1/2” Phillips screws and (2) #8x3/8” Pan head screws. (Figure B) 3. Attach the clock display using the factory hardware. 4. 2011-2013 models - Snap the hazard switch into the driver’s side a/c vent trim panel.
PAGE 5
Kit Assembly 99-7342 ISO DIN radio provision with pocket Double DIN radio provision 1. Attach the double DIN brackets to the aftermarket radio using the screws supplied with the radio, then secure the assembly to the pocket using the (4) supplied #8 Truss head screws. (Figure A) 1. Attach the double DIN brackets to the aftermarket radio using the screws supplied with the radio. (Figure B) 2. Locate the factory wiring harness in the dash.
PAGE 6
Notes
PAGE 7
Notes
PAGE 8
Installation Instructions for 99-7342 KNOWLEDGE IS POWER REV. 9/29/2014 INST99-7342 Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 9
Instrucciones de Instalacón para 99-7342 APLICACIONES Hyundai Sonata GLS/SE (sin NAV) 2011 Sonata (sin NAV) 2012-2014 99-7342 CABLEADO Y CONEXIONES DE ANTENA (se venden por separado) Arnés de cableado: • 70-7304 - Kia Hyundai 2010 y mas • HYBL-01 - Hyundai Bluelink interfaz no amp • HYBL-04 - HYU/KIA amp/Bluelink interfaz Adaptador de antena: • No se requiere REV.
PAGE 10
99-7342 Indice Desmontaje del tablero – Hyundai Sonata GLS 2011................................. 2-3 – Hyundai Sonata SE 2011 (sin NAV)...................... 2-3 – Hyundai Sonata 2012-2014 (sin NAV) ................. 2-3 Ensamble del kit – Preparación del kit ................................................4 Desmontaje del tablero 1. Desenganche y retire los 2 paneles de moldura que rodean la palanca de velocidades y el bolsillo. (Figura A) 2.
PAGE 11
99-7342 Desmontaje del tablero 6. 2014, con control de temperatura de auto - Retire los dos tornillos y retire el termistor fábrica, y déjela a un lado para ser montado en el nuevo kit. 7. Quite los (4) tornillos Phillips que sujetan el control del clima al panel del radio (Figura E) (Figura C) 8. Quite los tornillos (4) de Phillips que fijan la pantalla del reloj. (Figura E) 9. Retire los tornillos (4) que sujetan las rejillas de ventilación para el panel de la radio y soltar ellos.
PAGE 12
Ensamble del kit 99-7342 Preparación del kit 1. Coloque las rejillas de A/C en los paneles de adorno de ventilación A/C. (Figura A) 2. Conecte el los controles de clima A/C paneles de ajuste de ventilación izquierda y derecha y al panel de la vivienda principal de la radio utilizando los (10) # 8x1/2” tornillos Phillips proporcionados y (2) 8# 3/8” tornillos de cabeza plana. (Figura B) 3. Coloque la pantalla del reloj usando el hardware de fábrica. 4.
PAGE 13
Desmontaje del tablero 99-7342 Provisión de radio ISO DIN con bolsillo Provisiones de radio doble DIN 1. Una los soportes doble DIN con el radio de mercado secundario y luego sujete el ensamble al bolsillo utilizando los (4) tornillos de cabeza segmentada #8 suministrados. (Figura A) 2. Ubique el arnés del cableado de fábrica en el tablero. Metra recomienda usar el adaptador de acoplamiento adecuado de Metra o AXXESS.
PAGE 14
Notas
PAGE 15
Notas
PAGE 16
Instrucciones de Instalacón para 99-7342 EL CONOCIMIENTO ES PODER sus habilidades deIS instalación y KMejore NOWLEDGE POWER REV. 9/29/2014 INST99-7342 Enhance your installation and fabrication skills by fabricación inscribiéndose en la escuela de enrolling in the most recognized and respected dispositivos electrónicos móviles más reconocida mobile electronics school in our industry. y respetada de nuestra industria. en Log onto www.installerinstitute.