User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 99-7347B Hyundai Accent In-Dash Single/Double DIN Dash Install Kit

METRA. The World’s best kits.

™

metraonline.com

REV. 2/23/2016 INST99-7347B

Installation instructions for part 99-7347B

CAUTION!

All accessories, switches, climate controls panels, and

especially air bag indicator lights must be connected before cycling

the ignition. Also, do not remove the factory radio with the key in the

on position, or while the vehicle is running.

• ISO DIN radio provision with pocket

• ISO DDIN radio provision

• Painted Black to match factory finish

• A) Radio trim panel • B) ISO DDIN brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7304

Antenna Adapter: • Not required

• Panel removal tool • Phillips screwdriver • Socket wrench

TOOLS REQUIRED

Hyundai Accent (excluding Radio Delete models) 2012-up

99-7347B

A B C D

Dash Disassembly ..................................................2

Kit Assembly

– ISO DIN radio provision with pocket ...................... 3

– ISO DDIN radio provision ...................................... 3

Table of Contents

Summary of content (8 pages)

PAGE 1
Installation instructions for part 99-7347B Hyundai Accent (excluding Radio Delete models) 2012-up 99-7347B Table of Contents Dash Disassembly...................................................2 Kit Assembly –. ISO DIN radio provision with pocket....................... 3 –. ISO DDIN radio provision.......................................
PAGE 2
99-7347B Dash Disassembly 1. Remove the radio surround panel from the dash. Disconnect all harnesses. (Figure A) 2. Remove (4) Phillips screws securing the radio chassis in the sub dash. Disconnect the harnesses and the antenna.
PAGE 3
99-7347B Kit Assembly ISO DIN radio provision with pocket ISO DDIN radio provision 1. Snap the radio trim panel into the factory radio surround panel. (Figure A) 1. Snap the radio trim panel into the factory radio surround panel. (Figure A) 2. Attach the pocket to the radio brackets using the (4) supplied #8 x 3/8” Phillips screws. (Figure B) 2. Attach the radio brackets to the radio using the screws supplied with the radio. (Figure B) (Figure A) 4.
PAGE 4
Installation instructions for part 99-7347B IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling. KNOWLEDGE IS POWER REV.
PAGE 5
Instrucciones de instalación para la pieza 99-7347B Hyundai Accent (excluyendo Radio Borrar modelos) 2012 y mas 99-7347B Indice Desmontaje del tablero...........................................2 Ensamble del kit –. Provisión de radio ISO DIN con cavidad................. 3 –. Provisión de radio ISO DDIN..................................
PAGE 6
99-7347B Desmontaje del tablero 1. Remove the radio surround panel from the dash. Disconnect all harnesses. (Figura A) 2. Quite los (4) tornillos Phillips que sujetan el chasís del radio en el tablero sub. Desconecte los arneses y la antena.
PAGE 7
99-7347B Ensamble del kit Provisión de radio ISO DIN con cavidad Provisión de radio ISO DDIN 1. Coloque a panel de moldura de radio en el panel envolvente radio de fábrica. (Figura A) 1. Coloque a panel de moldura de radio en el panel envolvente radio de fábrica. (Figura A) 2. Una el cavidad al soporte del radio con los (4) tornillos Phillips #8 x 3/8” suministrados. (Figura B) 2. Una los soportes del radio en la carcasa del radio usando los tornillos suministrados con el radio.
PAGE 8
Instrucciones de instalación para la pieza 99-7347B IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente como se indica en las instrucciones. Por favor tenga el vehículo desarmado y listo para ejecutar los pasos de resolución de problemas antes de llamar.