User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 99-7405 Single DIN Installation Kit for 2004-2008 Nissan Titan (Base Model Only) (Black)

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 4/1/2014 INST99-7405

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 99-7405

• A) Radio housing • B) ISO Brackets • C) ISO Trim plate

KIT COMPONENTS

• DIN radio provision with pocket

• ISO DIN radio provision with pocket

KIT FEATURES

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7550 - Nissan 1995-up • 70-7551 - Nissan 1995-up • 70-7552 - Nissan 2007-up

Antenna Adapter: • Not required

• Panel removal tool • Socket wrench

TOOLS REQUIRED

Nissan Titan 2004-up (base model only)

99-7405

A B C

Dash Disassembly

– Nissan Titan 2004-up ....................................... 2

Kit Assembly

–

DIN radio provision with pocket....................... 3

– ISO DIN radio provision with pocket ................ 3

Table of Contents

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-7405 APPLICATIONS Table of Contents Nissan Titan 2004-up (base model only) 99-7405 Dash Disassembly – Nissan Titan 2004-up ....................................... 2 KIT FEATURES • DIN radio provision with pocket • ISO DIN radio provision with pocket Kit Assembly – DIN radio provision with pocket....................... 3 – ISO DIN radio provision with pocket................ 3 KIT COMPONENTS • A) Radio housing • B) ISO Brackets • C) ISO Trim plate REV.
PAGE 2
Dash Disassembly 99-7405 Kit Assembly 99-7405 Nissan Titan 2004-up DIN radio provision with pocket 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation. 1. Unclip and remove entire panel surrounding radio and climate controls. (Figure A) 2. Remove (4) Phillips screws to remove radio. (Figure B) Continue to kit assembly 2.
PAGE 3
Kit Assembly 99-7405 99-7405 ISO DIN radio provision with pocket Notes 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation. 2. Mount the ISO Brackets to the radio with the screws supplied with the radio. (Figure A) 3. Slide the radio into the radio opening until the side clips engage and then snap the Trim plate into the radio housing.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 99-7405 KNOWLEDGE IS POWER REV. 4/1/2014 INST99-7405 Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.