INSTALLATION INSTRUCTIONS FOR PART 99-7406 APPLICATIONS Nissan 2004-2007 99-7406 KIT FEATURES • DIN head unit provision with pocket • ISO DIN head unit provision with pocket KIT COMPONENTS • A) Radio housing • B) Radio housing trim panel • C) ISO brackets • D) Trim plate • E) (6) Panel clips • F) (6) PPH-38 screws • G) Two sided tape (not shown) F C D WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: • 70-7550 - Nissan harness 1995-up • 70-7551 - Nissan amplified harness 1995-up Antenna
99-7406 Table of Contents Dash Disassembly – Nissan Pathfinder Armada 2004-2005...........................................................................3-4 – Nissan Titan 2004-2007 ................................................................................................3-4 Kit Preparation – Nissan Pathfinder Armada 2004-2005 .............................................................................. 5 – Nissan Titan 2004-2007 .....................................................................
Dash Disassembly 99-7406 Nissan Titan 2004-2007 Nissan Pathfinder Armada 2004-2005 1. Unclip and remove entire panel including the radio and climate controls. (Figure A) 2. Remove (4) Phillips screws to remove radio from sub-dash. (Figure B) 3. Unsnap and remove the outer trim rings around A/C control knobs.
Dash Disassembly 99-7406 Nissan Titan 2004-2007 Nissan Pathfinder Armada 2004-2005 4. Remove (4) T-10 Torx screws from the A/C controls to remove from the factory radio trim panel. (Figure D) INSIDE VIEW - RADIO TRIM PANEL BACK 5. Unclip and remove the hazard light switch assembly. 6. Remove (2) T10 Torx screws from the passenger air bag off light assembly and remove.
Kit Preparation 99-7406 Nissan Titan 2004-2007 Nissan Pathfinder Armada 2004-2005 1. Attach the A/C control to the 99-7406 radio housing trim panel using the supplied (4) Phillips PPH-38 screws. (Figure A) 2. Snap the outer trim rings onto the A/C control knobs. (Figure B) 0 1 2 3 4 C A/ 0 3. Attach the passenger air bag off light assembly to the 99-7406 radio housing trim Panel using the supplied (2) Phillips PPH-38 screws.
Kit Assembly 99-7406 DIN head unit provision with pocket 1. Slide the DIN cage into the radio housing and secure by bending the metal locking tabs down. (Figure A) 2. Slide the aftermarket head unit into the cage and secure. (Figure B) 3. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. (Figure A) 4. Reassemble dash in reverse order of disassembly.
Kit Assembly 99-7406 ISO DIN head unit provision with pocket 1. Mount the ISO brackets to the head unit with the screws supplied with the unit. (Figure A) 2. Slide the head unit into the radio opening until the side clips engage. (Figure B) 3. Snap the trim plate into the radio housing. (Figure B) 4. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
REV. 8/3/2012 INST99-7406 INSTALLATION INSTRUCTIONS FOR PART 99-7406 METRA. THE WORLD’S BEST KITS.™ metraonline.
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7406 APLICACIONES Nissan 2004-2007 99-7406 CARACTERÍSTICAS DEL KIT • Accesorio para unidades centrales DIN con bolsillo • Accesorio para unidades centrales DIN ISO con bolsillo COMPONENTES DEL KIT • A) Carcasa del radio • B) Panel de moldura de carcasa de radio • C) Soportes ISO • D) Placa de moldura • E) (6) Ganchos del panel • F) (6) Tornillos PPH-38 • G) Cinta adhesiva de dos caras (no se muestra) F C D CABLEADO Y CONEXIONES DE ANTENA (se venden por s
99-7406 Indice Desmontaje del tablero – Nissan Pathfinder Armada 2004-2005...........................................................................3-4 – Nissan Titan 2004-2007 ................................................................................................3-4 Preparación del kit – Nissan Pathfinder Armada 2004-2005 .............................................................................. 5 – Nissan Titan 2004-2007 ......................................................................
Desmontaje del tablero 99-7406 Nissan Titan 2004-2007 Nissan Pathfinder Armada 2004-2005 1. Desenganche y quite todo el panel, incluyendo el radio y los controles del clima. (Figura A) 2. Quite los (4) tornillos Phillips para quitar el radio del sub tablero. (Figura B) 3. Desenganche y quite los anillos de la moldura exterior que rodean las perillas de control del aire acondicionado.
Desmontaje del tablero 99-7406 Nissan Titan 2004-2007 Nissan Pathfinder Armada 2004-2005 4. Quite los (4) tornillos Torx T-10 de los control del aire acondicionado para quitar el panel de la moldura del radio de fábrica. (Figura D) INSIDE VIEW - RADIO TRIM PANEL BACK 5. Desenganche y quite el conjunto del interruptor de las luces intermitentes.
Preparación del kit 99-7406 Nissan Titan 2004-2007 Nissan Pathfinder Armada 2004-2005 1. Coloque el control del aire acondicionado en el panel de la moldura de la carcasa del radio 997406 usando los (4) tornillos Phillips PPH-38 suministrados. (Figura A) 2. Coloque a presión los anillos de la moldura exterior en las perillas de control del aire acondicionado. (Figura B) 0 1 2 3 4 C A/ 0 R 1 2 R 3 M AX C A/ 4 R 3.
Preparación del kit 99-7406 Provisión de unidad central DIN con bolsillo 1. Deslice la reja DIN en la carcasa del radio y sujétela doblando hacia abajo las pestañas de metal. (Figura A) 2. Deslice la unidad central de mercado secundario en la reja y sujétela. (Figura B) 3. Ubique el arnés del cableado de fábrica en el tablero. Metra recomienda usar el adaptador de acoplamiento adecuado de Metra o AXXESS.
Preparación del kit 99-7406 Provisión de unidades centrales ISO DIN con bolsillo 1. Monte los soportes ISO en la unidad central con los tornillos incluidos con la unidad. (Figura A) 2. Deslice la unidad central en la apertura del radio hasta que los ganchos laterales entren a presión. (Figura B) 3. Coloque a presión la placa de la moldura en la carcasa del radio. (Figura B) 4. Ubique el arnés del cableado de fábrica en el tablero.
REV. 8/3/2012 INST99-7406 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7406 METRA. THE WORLD’S BEST KITS.™ metraonline.