User Manual

99-7411

INSTALLATION

INSTRUCTIONS

APPLICATIONS

CAR PAGE

NISSAN

300ZX 1984-87.......................................................1-2

KIT COMPONENTS

TOOLS REQUIRED

Cutting tool

Wrench

Phillips screwdriver

(4) Phillips Pan-head

Screws

(4) Speed Clips

KIT FEATURES

Shaft and

DIN unit

provisions

Faceplate

Radio Housing

1-800-221-0932 www.metraonline.com

rev. 250701

PAGE 1
KIT FEATURES Shaft and DIN unit provisions KIT COMPONENTS 99-7411 INSTALLATION INSTRUCTIONS Radio Housing APPLICATIONS Faceplate CAR PAGE NISSAN 300ZX 1984-87.......................................................1-2 (4) Phillips Pan-head Screws (4) Speed Clips TOOLS REQUIRED Phillips screwdriver Cutting tool 1-800-221-0932 rev. 250701 Wrench www.metraonline.
PAGE 2
ALL VEHICLES 2b 1 Factory radio housing Radio trim bezel DIN HEAD UNITS: Cut and remove the shaft supports from the Faceplate. Snap the Faceplate onto the front of the Radio Housing. Mount the Faceplate/Radio Housing assembly to the factory radio housing with (4) Phillips Pan-head Screws and (4) Speed Clips supplied. Slide the DIN cage into the Housing and secure by bending the metal locking tabs down. Slide the aftermarket head unit into the cage until secure.