Specifications

ManualsBrandsMetra Manualschassis components99-7427B

INSTALLATION INSTRUCTIONS FOR PART 99-7427

99-7427B/

99-7427G

(NON NAV MODELS)

(W/O TECH PACKAGE)

KIT FEATURES

• DIN Radio Provision With Pocket

• ISO Mount Radio Provision With Pocket

• PAINTED TO MATCH FACTORY DASH:

99-7427B=BLACK, 99-7427G=GRAY

• Textured To Match Factory Dash

• A) Radio Housing • B) Trim Plate • C) ISO Brackets • D) Module Brackets

• E) (2) Phillips Head Screws

KIT COMPONENTS

Small Flat Blade Screwdriver/ Panel Removal Tool

• Phillips Screwdriver

1-800-221-0932

www.metraonline.com

TOOLS REQUIRED:

WIRING AND ANTENNA CONNECTIONS

(Sold Separately)

• 70-7552 - Nissan harness 2007-up

• 40-NI12 - Nissan antenna adapter 2007-up

APPLICATIONS

Nissan Maxima 2009-11

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-7427 APPLICATIONS Nissan Maxima 2009-11 99-7427B/ 99-7427G (NON NAV MODELS) (W/O TECH PACKAGE) KIT FEATURES • DIN Radio Provision With Pocket • ISO Mount Radio Provision With Pocket • PAINTED TO MATCH FACTORY DASH: 99-7427B=BLACK, 99-7427G=GRAY • Textured To Match Factory Dash KIT COMPONENTS • A) Radio Housing • B) Trim Plate • C) ISO Brackets • D) Module Brackets • E) (2) Phillips Head Screws B A E C D WIRING AND ANTENNA CONNECTIONS (Sold Separately) • 70-7552 -
PAGE 2
99-7427 TABLE OF CONTENTS Dash Disassembly - Nissan Maxima 2009-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Kit Assembly - DIN Radio Provision / ISO Mount Radio Provision With Pocket . . . . . . . 3 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 *Note: Refer also to the instructions included with the aftermarket radio.
PAGE 3
99-7427 DASH DISASSEMBLY NISSAN MAXIMA 2009-11 (NON NAV MODELS) (W/O TECH PACKAGE) A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the panel above the radio including the a/c vents and the climate controls. Unplug and remove the panel. (Figure A) PASS AIR BAG CD CHA NGER 3 Unclip and remove the panel below the radio. (Figure B) AUX IN 4 Remove (6) Phillips screws securing the radio. Unplug and remove the radio.
PAGE 4
99-7427 KIT PREPARATION NISSAN MAXIMA 2009-11 *Note: Refer also to the instructions included with the aftermarket radio. 1 Attach the module brackets to the radio housing using the (2) Phillips head screws. (Figure A) A 2 Attach the module to the bracket/ housing assembly using the factory Torx screws from step 5 of the dash disassembly. (Figure B) Continue to final assembly.
PAGE 5
99-7427 KIT ASSEMBLY DIN RADIO PROVISION WITH POCKET *Note: Refer also to the instructions included with the aftermarket radio. 1 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs outward. (Figure A) A 2 Slide the aftermarket radio into the cage until it snaps into place. (Figure B) Continue to final assembly. B ISO MOUNT RADIO PROVISION WITH POCKET 1 Mount the ISO Brackets to the aftermarket radio using the screws supplied with the radio.
PAGE 6
99-7427 FINAL ASSEMBLY FINAL ASSEMBLY FINAL ASSEMBLY A B (A) Strip wire ends back 1/2" B) Twist ends together C C) Solder D) Tape D 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit). 2 Re-connect the negative battery terminal and test the unit for proper operation.
PAGE 7
99-7427 NOTES 5
PAGE 8
99-7427 INSTRUCTIONS 1-800-221-0932 www.metraonline.com REV.