User Manual

ManualsBrandsMetra ManualsAudio & Video AccessoriesMetra 99-7428G Double DIN/ISO DIN Installation Dash Kit for 2009 Nissan Frontier LE/SE (Gray)

METRA. The World’s best kits.

™

metraonline.com

REV. 12/14/2015 INST99-7428

Installation instructions for part 99-7428

CAUTION!

Metra recommends disconnecting the negative bat

tery terminal before beginning any installation, unless the vehicle

manufacturer recommends against so. Please check with your local

Dealership for more information. All accessories, switches, climate

controls panels, and especially air bag indicator lights must be con

nected before reconnecting the battery or cycling the ignition. Also,

do not remove the factory radio with the key in the on position, or the

vehicle running. It would be best to remove the key from the ignition

and then wait a few seconds before removing the factory radio.

• DIN radio provision with pocket

• ISO DIN radio provision with pocket

• ISO DDIN radio provision

• 99-7428B = Black, 99-7428G = Gray

• A) Radio Housing • B) ISO DDIN trim plate • C ) ISO DDIN Brackets • D) ISO trim plate

• E) ISO Brackets • F) Pocket

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • Please visit metraonline.com

for wiring harness options

Antenna Adapter: • Please visit metraonline.com

for antenna adapter options

• Panel removal tool • Phillips screwdriver • Torx T-10 driver

TOOLS REQUIRED

Nissan 2009-2012 / Suzuki 2009-2011

99-7428

A B D F

Dash Disassembly ..................................................2

Kit Preparation ........................................................ 2

Kit Assembly

– DIN radio provision with pocket ............................ 3

– ISO DIN radio provision with pocket ...................... 3

– ISO DDIN radio provision ...................................... 4

Table of Contents

C E

APPLICATIONS

NISSAN

Frontier LE 2009-2010

Frontier Pro-4X 2009-2012

Frontier SE (with a V6 engine)

2009-2011

Frontier SL 2011-2012

Frontier SV 2011-2012

Frontier SV-I4 2012

Xterra Off-Road 2009-2011

Xterra Pro-4X 2012

Xterra S 2009-2012

Xterra SE 2009-2011

SUZUKI

Equator Crew Cab Sport

2009-2011

Equator Extended Cab Sport

2009-2011

Equator RMZ / RMZ Sport

2009-2011

Summary of content (8 pages)

PAGE 1
Installation instructions for part 99-7428 Nissan 2009-2012 / Suzuki 2009-2011 99-7428 KIT FEATURES • DIN radio provision with pocket • ISO DIN radio provision with pocket • ISO DDIN radio provision • 99-7428B = Black, 99-7428G = Gray REV. 12/14/2015 INST99-7428 B C D E Dash Disassembly...................................................2 Kit Preparation.........................................................2 Kit Assembly –. DIN radio provision with pocket............................. 3 –.
PAGE 2
99-7428 Dash Disassembly Kit Preparation 1. Unclip and remove the trim panel above the radio and climate controls. (Figure A) 1. Attach the climate controls to the radio housing using the factory hardware removed in the dash disassembly. (Figure A) 2. Remove (1) Phillips screw under the panel securing the center dash panel. (Figure B) 3. Unclip and remove the center dash panel including the radio and climate controls. (Figure C) 2.
PAGE 3
99-7428 Kit Assembly DIN radio provision with pocket ISO DIN radio provision with pocket 1. Remove the metal DIN sleeve from the aftermarket radio. 1. Remove the metal DIN sleeve and trim ring from the aftermarket radio. 2. Slide the sleeve into the radio housing and secure by bending the metal locking tabs outward. (Figure A) 2. Mount the ISO brackets to the radio using the screws supplied with the radio. (Figure A) 3. Slide the radio into the radio housing until it snaps into place.
PAGE 4
Installation instructions for part 99-7428 Kit Assembly IMPORTANT ISO DDIN radio provision 1. Cut and remove the center bar from the radio housing. (Figure A) 2. Snap the ISO DDIN brackets to the inside edge of the radio housing. (Figure B) 3. Slide the radio into the bracket/radio housing assembly and secure with the screws supplied with the radio. (Figure C) (Figure A) REV. 12/14/2015 INST99-7428 4. Snap the ISO DDIN trim plate onto the front of the radio housing. (Figure C) 5.
PAGE 5
Instrucciones de instalación para la pieza 99-7428 Nissan 2009-2012 / Suzuki 2009-2011 99-7428 CARACTERÍSTICAS DEL KIT • Provisión de radio DIN con cavidad • Provisión de radio ISO DIN con cavidad • Provisión de radio ISO DDIN • 99-7428B = Negro, 99-7428G = Gris COMPONENTES DEL KIT • A) Carcasa del radio • B) Placa de moldura ISO DDIN • C ) Soportes ISO DDIN • D) Placa de moldura ISO • E) Soportes ISO • F) Cavidad REV. 12/14/2015 INST99-7428 A B C D E F Indice Desmontaje del tablero................
PAGE 6
99-7428 Desmontaje del tablero 1. Desenganche y quite el panel de moldura sobre la radio y los controles del clima. (Figura A) 2. Quite (1) tornillo Phillips debajo del panel que sujeta el panel del tablero central. (Figura B) 3. Desenganche y quite el panel del tablero central, incluyendo el radio y los controles de clima. (Figura C) 4. Quite los (10) tornillos Torx T-10 del panel de la moldura del radio/control de clima para quitarlo del panel del tablero central. 5.
PAGE 7
99-7428 Ensamble del kit Provisión de radio DIN con cavidad Provisión de radio ISO DIN con cavidad 1. Quite la manga de metal DIN y el anillo de moldura del radio de mercado secundario. 2. Monte los soportes ISO en el radio con los tornillos que vienen con el radio. (Figura A) 1. Quite la manga de metal DIN del radio de mercado secundario. 2. Deslice la manga en la carcasa del radio y sujétela doblando hacia abajo las pestañas de metal. (Figura A) 3.
PAGE 8
Instrucciones de instalación para la pieza 99-7428 Ensamble del kit IMPORTANTE Provisión de radio ISO DDIN 1. Corte y quite la barra central de la carcasa de radio. (Figura A) 2. Coloque a presión los soportes ISO DDIN en el borde interior de la carcasa del radio. (Figura B) 3. Deslice el radio en el soporte/ensamble de carcasa del radio y sujételo con los tornillos suministrados con el radio. (Figura C) (Figura A) REV. 12/14/2015 INST99-7428 4.